For some reason my hks turbo timer type 0 is not staying on. As soon as the engine goes off, then timer goes off. It is connected to my ebrake and its all attached properly(ive done it 4 times so far) Is there a certain way to set it up in the beginning?
I could just be setting it up wrong? The instructions arent very specific on how to program it, maybe thats whats wrong. Any ideas on how to set it up.

 

isnt this like the 3rd time u posted this ?

 

Ive changed things because ive figured some things out, this is the last step i have and no one seems to know...sorry for the trouble its just been a few days and the timers just hanging from under the steering wheel having no purpose

 

maybe because you did not set the time on the turbo timer on the Desired Time??...
i have the same one, and it's easy to use.

 

Youve got PM

 

Night bump, anyone set one up before?

 

next day bump

 

is the TT, used or new? are you sure you have the right wire connected to the ebrake? Disconnect that wire and re-check TT.

TT could be broken, thats the last thing i can think of which is verry rare.

 

if you have the harness you still need to tap into a 10 or 12v (forgot which lol) on top of tapping into e-brake wire IIRC...i have an HKS in my Scobbie and i tapped into the cigarette lighter for the 10v and e-brake cable and thing works like charm every single time.

if you didnt get an ignition harness then your wiring could be messed up.

good luck mate.

 

You need a constant power source. You're most likely tapped into something on the ACC switch, which will cut power as soon as you turn off the car.

 

Alright ill check that! Thanks

 

Try this.... Before you turn you car off wait a minute...then turn your key to the off position, it always works for me and saves me a lot of money!