Evo 8 ECU Swap Works!!!
#271
Evolved Member
iTrader: (21)
ok so this is my first post on this web site.
Im workin on a 2003 Lancer ES automatic
it is currently making 283 HP i dont know the torque right now.
he wants MORE power so i was under the impression that an EVO 8 ECU would bolt up and i would have to swap mad wires.
FALSE
i will put this out there for clarification for everyone
EVO 8 ECU WILL NOT PLUG IN to an Auto trans lancer ecu. the plugs are differant
(has anyone solved this problem with some simplicity)
i keep hearing about a dual ecu but in all the pin outs I have seen, I do not see anything in the ecu that controls the trans. (any input or more pinouts would be great)
i have already bought an evo 8 AEM EMS and am determined to get it to work.
Road Race motorsports has installed THREE!!!!!!!!!!! boxes to modify his stock ecu to make more power but it will NOT idle right NO power off boost. and stechy power on boost.
im willing to represent ALL the automatic guys and experiment with this car if i can get some help.
I will make a full write up one i get it workin.
thanks
Im workin on a 2003 Lancer ES automatic
it is currently making 283 HP i dont know the torque right now.
he wants MORE power so i was under the impression that an EVO 8 ECU would bolt up and i would have to swap mad wires.
FALSE
i will put this out there for clarification for everyone
EVO 8 ECU WILL NOT PLUG IN to an Auto trans lancer ecu. the plugs are differant
(has anyone solved this problem with some simplicity)
i keep hearing about a dual ecu but in all the pin outs I have seen, I do not see anything in the ecu that controls the trans. (any input or more pinouts would be great)
i have already bought an evo 8 AEM EMS and am determined to get it to work.
Road Race motorsports has installed THREE!!!!!!!!!!! boxes to modify his stock ecu to make more power but it will NOT idle right NO power off boost. and stechy power on boost.
im willing to represent ALL the automatic guys and experiment with this car if i can get some help.
I will make a full write up one i get it workin.
thanks
i was running speed density at 15psi on this rom with no problems
#272
Will someone flash my ecu If I pay mail both ways
I'm just tryna to run a g4js with a tdo5 hr 9.8t but I need a evo rom flash witch I am not capable of doin..... help?
Thread
Thread Starter
Forum
Replies
Last Post
Pd1
ECU Flash
456
Dec 6, 2021 01:28 AM