my knock issue
my knock issue
ok based on the following info I have I think im going to rich at a certain point or maybe im just too rich in the first place. but here are some logs to help verify my information I came upon. hints ans tips would help out so I can combat knock becuase I remember someone telling me that richining up the mix at the knock point can defeat knock... but the question is how much richer because this is true from what I researched
rich like 10 afr will give you knock from what I hear. It's that happy medium you want to be in. Evo's come with crazy advanced timing, but then they are pig rich...so it does combat knock, but at a certain point it's right to pull timing. I can't check logs, gotta head south and do some e-mail migration. Expect comments from me later on though, cause I'ma be bored off my butt waiting on everything to sync up.
OK, So you've peaked my interest. Here's what I think might help. Log as few items as you can.
wideband, RPM, 1-byteload, knocksum, and knock voltage. Whatever else it makes you log with that is fine, but try to get as many samples as you can by reducingthe clutter being logged. I think looking at the knock voltage will help tell if what you are seeing is real knock, or if the knock sensor is too sensitive.
wideband, RPM, 1-byteload, knocksum, and knock voltage. Whatever else it makes you log with that is fine, but try to get as many samples as you can by reducingthe clutter being logged. I think looking at the knock voltage will help tell if what you are seeing is real knock, or if the knock sensor is too sensitive.
Thread
Thread Starter
Forum
Replies
Last Post








