Notices

2016 Lancer GTS tuning

Thread Tools
 
Search this Thread
 
Old Oct 15, 2018 | 03:09 AM
  #46  
jajk's Avatar
Newbie
5 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Sep 2017
Posts: 86
Likes: 171
From: Queensland
Thread closed

Last edited by jajk; Jan 20, 2023 at 09:18 PM.
Reply
Old Mar 5, 2019 | 06:42 PM
  #47  
danny1058's Avatar
Newbie
 
Joined: Mar 2012
Posts: 27
Likes: 0
From: Puerto Rico
i read a 2015 lancer and here is the rom, but i have a question, did i need a special tool for flash or just the tactrix ?? i need the xml





Originally Posted by merlin.oz
The 16x12 map at 58123 is I believe the LOWER BOUND TIMING map.

Maps 53869 ans 53975 are WARMUP SPARK RETARD maps.

I have been searching for the 1st and 2nd gear throttle limiter table/s for many months now and are no closer to a result. Its very annoying. ie its pissing me off big time.
I have looked at 5AB02 and 5AB34, but no don't believe it is either of those.

The throttle decel position table may be the one at 57d4a, not confirmed.




Reply
Old Mar 5, 2019 | 07:23 PM
  #48  
jajk's Avatar
Newbie
5 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Sep 2017
Posts: 86
Likes: 171
From: Queensland
Thread closed

Last edited by jajk; Jan 20, 2023 at 09:18 PM.
Reply
Old Sep 26, 2019 | 07:14 AM
  #49  
Jsat's Avatar
Newbie
 
Joined: Sep 2019
Posts: 5
Likes: 0
From: Perth
Def File

Originally Posted by jajk
Hey BigWingThings I have a 2013 Lancer VRX (Aus version of GTS) which I have successfully tuned with extremely good results. I had to define the main maps in the ROM myself. If you post your srf file (should be 1024kB in size), I can create a basic definition file to get you started.
Completely stock, tweaking the mivec intake and exhaust cams, ignition timing and AFR maps gives stunning results in both power and economy. Was going to do a few other mods but now I will keep my money in my pocket.

Hi jajk

If i send my SRF file can u do a def file for me, I would really appreciate it if u can help

Cheers. Jsat
Reply
Old Sep 26, 2019 | 07:22 AM
  #50  
Jsat's Avatar
Newbie
 
Joined: Sep 2019
Posts: 5
Likes: 0
From: Perth
Hi Guy,s

Have read my ECU on my 2009 2.4l cvt with ecu flash and have the .SRF File can anyone now assist me from here, I need the XML is this correct ???

Regards Jsat
Reply
Old Sep 26, 2019 | 12:40 PM
  #51  
Abdullatif's Avatar
Newbie
 
Joined: Jul 2018
Posts: 25
Likes: 1
From: United States
Originally Posted by Jsat
Hi Guy,s

Have read my ECU on my 2009 2.4l cvt with ecu flash and have the .SRF File can anyone now assist me from here, I need the XML is this correct ???

Regards Jsat
I have a 2012 4b12 and i'm stuck just like you... i got the SRF but i couldn't find a definition for my model....
Reply
Old Sep 26, 2019 | 04:06 PM
  #52  
jajk's Avatar
Newbie
5 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Sep 2017
Posts: 86
Likes: 171
From: Queensland
Thread closed

Last edited by jajk; Jan 20, 2023 at 09:19 PM.
Reply
Old Sep 26, 2019 | 04:47 PM
  #53  
Abdullatif's Avatar
Newbie
 
Joined: Jul 2018
Posts: 25
Likes: 1
From: United States
Thank you Jajk!!!

This is my ROM ID: https://gofile.io/?c=IXxOlj

I have a 2012 Mitsubishi lancer SE, CVT.
VIN: JA32V2FW4CU007496
Reply
Old Sep 26, 2019 | 08:54 PM
  #54  
jajk's Avatar
Newbie
5 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Sep 2017
Posts: 86
Likes: 171
From: Queensland
Thread closed

Last edited by jajk; Jan 20, 2023 at 09:19 PM.
Reply
Old Sep 26, 2019 | 09:34 PM
  #55  
Abdullatif's Avatar
Newbie
 
Joined: Jul 2018
Posts: 25
Likes: 1
From: United States
Thank you so much! I truly appreciate it, i would love if you send me the definition! I searched for Ecuflash 1.43, but i only could find the beta version...
Reply
Old Sep 26, 2019 | 09:59 PM
  #56  
jajk's Avatar
Newbie
5 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Sep 2017
Posts: 86
Likes: 171
From: Queensland
Thread closed

Last edited by jajk; Jan 20, 2023 at 09:19 PM.
Reply
Old Sep 26, 2019 | 10:15 PM
  #57  
Abdullatif's Avatar
Newbie
 
Joined: Jul 2018
Posts: 25
Likes: 1
From: United States
Thank you so much Jajk, i will follow your thread about tuning and keep researching also. I truly thank you for helping me!
Reply
Old Sep 27, 2019 | 06:43 AM
  #58  
Jsat's Avatar
Newbie
 
Joined: Sep 2019
Posts: 5
Likes: 0
From: Perth
srf

https://gofile.io/?c=Qt9sNo

Hi Jajk

Above is my SRF file. 2009 2.4 cvt lancer aspire

So will the Bin file u uploaded be ok to send to my ECU

Regards Jsat

Last edited by Jsat; Sep 27, 2019 at 07:03 AM.
Reply
Old Sep 27, 2019 | 07:04 AM
  #59  
Jsat's Avatar
Newbie
 
Joined: Sep 2019
Posts: 5
Likes: 0
From: Perth
Many Many thanks, I will give it a go this weekend and let u know the outcome

Thanks Again

Jsat


Originally Posted by jajk
Try flashing it with the ecuflash version you already have before reverting to the 1.43 (beta) version - sometimes ecuflash gets upset, sometimes it doesn't.
Jsat, you can do exactly the same thing flashing this later ROM.

Standard Warning:
  1. Defs always contain errors so don't assume everything is correct.
  2. A handful of maps will provide maximum power, the rest are there for you to dig yourself a hole you can't get out of.
  3. Don't mess with things you know nothing about unless you want to buy a new engine.
  4. All your friends are tuning experts but rarely are they ever correct.
Reply
Old Sep 29, 2019 | 02:30 AM
  #60  
Jsat's Avatar
Newbie
 
Joined: Sep 2019
Posts: 5
Likes: 0
From: Perth
bin

Hi Jajk

Using ECU Flash 1.4 it gets about 3/4 the way thru programming and comes up with and error and stops

Flashed back my other SRF File and all good

Any Tips would be great

Regards jsat

Last edited by Jsat; Sep 29, 2019 at 06:53 AM.
Reply



All times are GMT -7. The time now is 04:13 AM.