2016 Lancer GTS tuning
Oct 19, 2017, 02:23 PM
#18
Evolved Member
The 16x12 map at 58123 is I believe the LOWER BOUND TIMING map.
Maps 53869 ans 53975 are WARMUP SPARK RETARD maps.
I have been searching for the 1st and 2nd gear throttle limiter table/s for many months now and are no closer to a result. Its very annoying. ie its pissing me off big time.
I have looked at 5AB02 and 5AB34, but no don't believe it is either of those.
The throttle decel position table may be the one at 57d4a, not confirmed.
Maps 53869 ans 53975 are WARMUP SPARK RETARD maps.
I have been searching for the 1st and 2nd gear throttle limiter table/s for many months now and are no closer to a result. Its very annoying. ie its pissing me off big time.
I have looked at 5AB02 and 5AB34, but no don't believe it is either of those.
The throttle decel position table may be the one at 57d4a, not confirmed.
The following users liked this post:
riyodan_04 (Sep 11, 2020)
Oct 20, 2017, 02:39 AM
#21
Evolved Member
50423, 504B7, 5054B are all Traction Control related
50423 is probably a Traction Control Spark Retard.
504B7 I think is a minimum limit for 50423.
507F9 is the Upshift Lower Bound Timing Retard.
53651 is Hi-Octane Spark map, the main spark map
5375D is Lo-Octane Spark map (main)
548A3 is the EGR Spark Adder I believe.
56C15 and 56D49 are Spark Idle maps with a water temp interpolator at 56D3A I think.
581EB is the Lo-Octane Spark and 582B3 the Hi-Octane, but for what condition?
It was me that originally labeled them as Acceleration maps, however I now know they get used during cruise control, but so do the main maps. In fact during cruise control operation the ECU uses both. I am now considering these may get called with AC ON condition.
Have not had the opportunity to confirm this.
In any case I have now dropped the acceleration map label.
53869 and 53975 are Spark Warmup Retard Hi/Lo Octane
50423 is probably a Traction Control Spark Retard.
504B7 I think is a minimum limit for 50423.
507F9 is the Upshift Lower Bound Timing Retard.
53651 is Hi-Octane Spark map, the main spark map
5375D is Lo-Octane Spark map (main)
548A3 is the EGR Spark Adder I believe.
56C15 and 56D49 are Spark Idle maps with a water temp interpolator at 56D3A I think.
581EB is the Lo-Octane Spark and 582B3 the Hi-Octane, but for what condition?
It was me that originally labeled them as Acceleration maps, however I now know they get used during cruise control, but so do the main maps. In fact during cruise control operation the ECU uses both. I am now considering these may get called with AC ON condition.
Have not had the opportunity to confirm this.
In any case I have now dropped the acceleration map label.
53869 and 53975 are Spark Warmup Retard Hi/Lo Octane
The following users liked this post:
riyodan_04 (Sep 11, 2020)
Oct 20, 2017, 01:21 PM
#24
Evolved Member
I dont confine my attention to just Evos and I have been tuning Lancers since 2010.
Spent many hundreds of hours working on Lancer xml am always looking to improve the knowledge base.
The EGR function will typically add some timing if it has maps for same.
There are many Lancers out there that do have an EGR valve, unfortunately.
Yes, there are a lot of adders and subtractors.
Spent many hundreds of hours working on Lancer xml am always looking to improve the knowledge base.
The EGR function will typically add some timing if it has maps for same.
There are many Lancers out there that do have an EGR valve, unfortunately.
Yes, there are a lot of adders and subtractors.
The following 2 users liked this post by merlin.oz:
riyodan_04 (Sep 11, 2020),
Wanchai Panpron (Feb 21, 2019)
The following 2 users liked this post by jajk:
riyodan_04 (Sep 11, 2020),
Wanchai Panpron (Feb 21, 2019)
Oct 20, 2017, 06:18 PM
#26
Newbie
Join Date: Oct 2017
Location: El Paso
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys,
I have been reading up on tuning a lot lately when I came up on this thread. I am extremely interested in the ROM tuning thread that is gonna be made.
I'm currently waiting on some new headers to arrive so i can install them and then follow through with a tune.
Thanks in advance!
I have been reading up on tuning a lot lately when I came up on this thread. I am extremely interested in the ROM tuning thread that is gonna be made.
I'm currently waiting on some new headers to arrive so i can install them and then follow through with a tune.
Thanks in advance!
Oct 20, 2017, 10:07 PM
#28
Newbie
Join Date: Oct 2017
Location: El Paso
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hey eddiegts,
Have you got an OpenPort 2.0 cable? You will need one to do any ROM tuning.
Join in the fun on my thread:https://www.evolutionm.net/forums/la...ng-thread.html
Have you got an OpenPort 2.0 cable? You will need one to do any ROM tuning.
Join in the fun on my thread:https://www.evolutionm.net/forums/la...ng-thread.html
Jan 21, 2018, 09:02 PM
#29
