ECU rom issue
#1
Newbie
Thread Starter
Join Date: Jun 2021
Location: Lauin
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ECU rom issue
Hello everyone
I got tactrix from china "fack one" i try put it in my car, trying to read from ecu, start ecuflash, select vehicul type "CAN vehicules HM8106F / 2006+ / memory model : M32186F8"
click at read from ECU's flash memory. turn ignition on the "ON" position. and press OK button to continue.
i think the first time the VIN car is read by the tools. after few seconds the connexion is lost.
i try to do the same think second time. but the fan / and lot of errors message is shown in the board (service required steerin wheel /check temperature/ check motor oil / service required battery...) the car didn't start up, only crank.
some people told me to exit programming stat. but without a result.
[20:10:38.533] EcuFlash Version 1.44.4347
[20:10:38.533] OS Version Windows 8
[20:10:38.533] Qt Version 5.2.0
[20:10:38.549] 67 memory models read.
[20:10:38.549] scanning for metadata models in C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata
[20:10:38.642] 745 ROM metadata models scanned.
[20:10:38.642] checksum module "subarudbw" loaded.
[20:10:38.642] checksum module "subarudiesel" loaded.
[20:10:38.642] checksum module "mitsucan" loaded.
[20:10:38.642] checksum module "mitsuh8" loaded.
[20:10:38.642] patch module "Subaru CAN Enhanced RAM Parameter Logging" loaded.
[20:10:38.642] patch module "Mitsu CAN RAM Parameter Logging" loaded.
[20:10:38.642] using metadata XML ID read_mitsum32186f8can from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/read templates/read_mitsum32186f8can.xml
[20:10:38.658] flashing tool "wrx02" loaded.
[20:10:38.658] flashing tool "wrx04" loaded.
[20:10:38.658] flashing tool "sti04" loaded.
[20:10:38.658] flashing tool "sti05" loaded.
[20:10:38.658] flashing tool "mitsukernel" loaded.
[20:10:38.658] flashing tool "mitsukernelocp" loaded.
[20:10:38.658] flashing tool "mitsubootloader" loaded.
[20:10:38.658] flashing tool "shbootmode" loaded.
[20:10:38.658] flashing tool "shaudmode" loaded.
[20:10:38.658] flashing tool "subarucan" loaded.
[20:10:38.658] flashing tool "subarucand" loaded.
[20:10:38.658] flashing tool "subarubrz" loaded.
[20:10:38.674] flashing tool "subaruhitachi" loaded.
[20:10:38.674] flashing tool "mitsucan" loaded.
[20:10:38.705] J2534 API Version: 04.04
[20:10:38.705] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.705] Device Firmware Version: 1.17.4877
[20:10:38.705] Device Serial Number: TAhJALxt
[20:10:38.705] interface close
[20:10:38.736] J2534 API Version: 04.04
[20:10:38.736] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.736] Device Firmware Version: 1.17.4877
[20:10:38.736] Device Serial Number: TAhJALxt
[20:10:38.736] interface close
[20:10:38.768] J2534 API Version: 04.04
[20:10:38.768] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.768] Device Firmware Version: 1.17.4877
[20:10:38.768] Device Serial Number: TAhJALxt
[20:10:38.768] interface close
[20:10:38.799] J2534 API Version: 04.04
[20:10:38.799] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.799] Device Firmware Version: 1.17.4877
[20:10:38.799] Device Serial Number: TAhJALxt
[20:10:38.799] interface close
[20:10:38.830] J2534 API Version: 04.04
[20:10:38.830] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.830] Device Firmware Version: 1.17.4877
[20:10:38.830] Device Serial Number: TAhJALxt
[20:10:38.830] interface close
[20:10:38.861] J2534 API Version: 04.04
[20:10:38.861] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.861] Device Firmware Version: 1.17.4877
[20:10:38.861] Device Serial Number: TAhJALxt
[20:10:38.861] interface close
[20:10:44.442] J2534 API Version: 04.04
[20:10:44.442] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:44.442] Device Firmware Version: 1.17.4877
[20:10:44.442] Device Serial Number: TAhJALxt
[20:10:48.905] -- connecting to kernel --
[20:10:48.905] kernel get version
[20:10:49.062] ECU HW part number : 1860A800
[20:10:49.109] ECU SW part number : 1860A80001
[20:10:49.874] -- unlocking ECU --
[20:10:49.874] starting session...
[20:10:49.874] requesting seed...
[20:10:49.874] sending key...
[20:10:50.171] interface close
[20:10:50.202] interface close
[20:10:54.857] using metadata XML ID read_mitsum32186f8can from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/read templates/read_mitsum32186f8can.xml
[20:10:54.889] J2534 API Version: 04.04
[20:10:54.889] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:54.889] Device Firmware Version: 1.17.4877
[20:10:54.889] Device Serial Number: TAhJALxt
[20:10:56.796] -- loading kernel --
[20:10:56.796] -- connecting to kernel --
[20:10:56.796] kernel get version
[20:10:56.932] ECU HW part number : 1860A800
[20:10:56.952] ECU SW part number : 1860A80001
[20:10:56.952] -- unlocking ECU --
[20:10:56.952] starting session...
[20:10:56.962] requesting seed...
[20:10:56.972] sending key...
[20:10:57.262] interface close
[20:10:57.293] interface close
[20:11:08.132] J2534 API Version: 04.04
[20:11:08.132] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:11:08.132] Device Firmware Version: 1.17.4877
[20:11:08.132] Device Serial Number: TAhJALxt
[20:11:10.444] -- connecting to kernel --
[20:11:10.444] kernel get version
[20:11:10.604] ECU HW part number : 1860A800
[20:11:10.654] ECU SW part number : 1860A80001
[20:11:11.427] -- unlocking ECU --
[20:11:11.427] starting session...
[20:11:11.427] requesting seed...
[20:11:11.427] sending key...
[20:11:11.724] interface close
[20:11:11.739] interface close
[20:11:19.165] J2534 API Version: 04.04
[20:11:19.165] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:11:19.165] Device Firmware Version: 1.17.4877
[20:11:19.165] Device Serial Number: TAhJALxt
[20:11:21.168] -- reading ECU ID --
[20:11:21.296] ECU HW part number : 1860A800
[20:11:21.316] ECU SW part number : 1860A80001
[20:11:21.316] interface close
[20:11:21.337] interface close
please if some one have the same issu, and can help. I'll be grateful
I got tactrix from china "fack one" i try put it in my car, trying to read from ecu, start ecuflash, select vehicul type "CAN vehicules HM8106F / 2006+ / memory model : M32186F8"
click at read from ECU's flash memory. turn ignition on the "ON" position. and press OK button to continue.
i think the first time the VIN car is read by the tools. after few seconds the connexion is lost.
i try to do the same think second time. but the fan / and lot of errors message is shown in the board (service required steerin wheel /check temperature/ check motor oil / service required battery...) the car didn't start up, only crank.
some people told me to exit programming stat. but without a result.
[20:10:38.533] EcuFlash Version 1.44.4347
[20:10:38.533] OS Version Windows 8
[20:10:38.533] Qt Version 5.2.0
[20:10:38.549] 67 memory models read.
[20:10:38.549] scanning for metadata models in C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata
[20:10:38.642] 745 ROM metadata models scanned.
[20:10:38.642] checksum module "subarudbw" loaded.
[20:10:38.642] checksum module "subarudiesel" loaded.
[20:10:38.642] checksum module "mitsucan" loaded.
[20:10:38.642] checksum module "mitsuh8" loaded.
[20:10:38.642] patch module "Subaru CAN Enhanced RAM Parameter Logging" loaded.
[20:10:38.642] patch module "Mitsu CAN RAM Parameter Logging" loaded.
[20:10:38.642] using metadata XML ID read_mitsum32186f8can from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/read templates/read_mitsum32186f8can.xml
[20:10:38.658] flashing tool "wrx02" loaded.
[20:10:38.658] flashing tool "wrx04" loaded.
[20:10:38.658] flashing tool "sti04" loaded.
[20:10:38.658] flashing tool "sti05" loaded.
[20:10:38.658] flashing tool "mitsukernel" loaded.
[20:10:38.658] flashing tool "mitsukernelocp" loaded.
[20:10:38.658] flashing tool "mitsubootloader" loaded.
[20:10:38.658] flashing tool "shbootmode" loaded.
[20:10:38.658] flashing tool "shaudmode" loaded.
[20:10:38.658] flashing tool "subarucan" loaded.
[20:10:38.658] flashing tool "subarucand" loaded.
[20:10:38.658] flashing tool "subarubrz" loaded.
[20:10:38.674] flashing tool "subaruhitachi" loaded.
[20:10:38.674] flashing tool "mitsucan" loaded.
[20:10:38.705] J2534 API Version: 04.04
[20:10:38.705] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.705] Device Firmware Version: 1.17.4877
[20:10:38.705] Device Serial Number: TAhJALxt
[20:10:38.705] interface close
[20:10:38.736] J2534 API Version: 04.04
[20:10:38.736] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.736] Device Firmware Version: 1.17.4877
[20:10:38.736] Device Serial Number: TAhJALxt
[20:10:38.736] interface close
[20:10:38.768] J2534 API Version: 04.04
[20:10:38.768] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.768] Device Firmware Version: 1.17.4877
[20:10:38.768] Device Serial Number: TAhJALxt
[20:10:38.768] interface close
[20:10:38.799] J2534 API Version: 04.04
[20:10:38.799] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.799] Device Firmware Version: 1.17.4877
[20:10:38.799] Device Serial Number: TAhJALxt
[20:10:38.799] interface close
[20:10:38.830] J2534 API Version: 04.04
[20:10:38.830] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.830] Device Firmware Version: 1.17.4877
[20:10:38.830] Device Serial Number: TAhJALxt
[20:10:38.830] interface close
[20:10:38.861] J2534 API Version: 04.04
[20:10:38.861] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:38.861] Device Firmware Version: 1.17.4877
[20:10:38.861] Device Serial Number: TAhJALxt
[20:10:38.861] interface close
[20:10:44.442] J2534 API Version: 04.04
[20:10:44.442] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:44.442] Device Firmware Version: 1.17.4877
[20:10:44.442] Device Serial Number: TAhJALxt
[20:10:48.905] -- connecting to kernel --
[20:10:48.905] kernel get version
[20:10:49.062] ECU HW part number : 1860A800
[20:10:49.109] ECU SW part number : 1860A80001
[20:10:49.874] -- unlocking ECU --
[20:10:49.874] starting session...
[20:10:49.874] requesting seed...
[20:10:49.874] sending key...
[20:10:50.171] interface close
[20:10:50.202] interface close
[20:10:54.857] using metadata XML ID read_mitsum32186f8can from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/read templates/read_mitsum32186f8can.xml
[20:10:54.889] J2534 API Version: 04.04
[20:10:54.889] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:10:54.889] Device Firmware Version: 1.17.4877
[20:10:54.889] Device Serial Number: TAhJALxt
[20:10:56.796] -- loading kernel --
[20:10:56.796] -- connecting to kernel --
[20:10:56.796] kernel get version
[20:10:56.932] ECU HW part number : 1860A800
[20:10:56.952] ECU SW part number : 1860A80001
[20:10:56.952] -- unlocking ECU --
[20:10:56.952] starting session...
[20:10:56.962] requesting seed...
[20:10:56.972] sending key...
[20:10:57.262] interface close
[20:10:57.293] interface close
[20:11:08.132] J2534 API Version: 04.04
[20:11:08.132] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:11:08.132] Device Firmware Version: 1.17.4877
[20:11:08.132] Device Serial Number: TAhJALxt
[20:11:10.444] -- connecting to kernel --
[20:11:10.444] kernel get version
[20:11:10.604] ECU HW part number : 1860A800
[20:11:10.654] ECU SW part number : 1860A80001
[20:11:11.427] -- unlocking ECU --
[20:11:11.427] starting session...
[20:11:11.427] requesting seed...
[20:11:11.427] sending key...
[20:11:11.724] interface close
[20:11:11.739] interface close
[20:11:19.165] J2534 API Version: 04.04
[20:11:19.165] J2534 DLL Version: 1.01.4341 Aug 8 2014 00:48:17
[20:11:19.165] Device Firmware Version: 1.17.4877
[20:11:19.165] Device Serial Number: TAhJALxt
[20:11:21.168] -- reading ECU ID --
[20:11:21.296] ECU HW part number : 1860A800
[20:11:21.316] ECU SW part number : 1860A80001
[20:11:21.316] interface close
[20:11:21.337] interface close
please if some one have the same issu, and can help. I'll be grateful
#2
What year is your Lancer? Did you connect your OP2.0 to a laptop with internet access? Cause that might cause it to lock up. Are the drivers installed correctly?
See attachment for recovery flash instructions
See attachment for recovery flash instructions
Thread
Thread Starter
Forum
Replies
Last Post