RRM Turbo kit parts list!!
Thread Starter
Evolving Member
iTrader: (13)
Joined: Feb 2003
Posts: 134
Likes: 0
From: Worldwide; Seattle, WA
I tried to do some research...
All I found just the partial parts in the kit.
Anyone can provide the whole list of parts in RRM Intercooled Turbo kit?
I will appreciate it.........please!!
All I found just the partial parts in the kit.
Anyone can provide the whole list of parts in RRM Intercooled Turbo kit?
I will appreciate it.........please!!
Non Intercooled
Electric fan and fittings to mount
Big T-28 turbo
Up pipe
Elbow/Down pipe (from turbo to stock down pipe)
Tial waste gate set to 5psi
Dump pipe for waste gate
Piping from turbo to TB
Piping from filter to turbo
Open element filter
Generic recirculating BOV (may upgrade)
Recirculating pipe from BOV to intake piping
Oil supply line (braided stainless)
3/8 NPT fitting for oil supply line to oil pan
AN fitting from oil supply line to turbo
AN fitting from turbo to oil return line
3/8 NPT fitting for oil return line to oil pan
Oil return line (heavy duty rubber)
Oil return line heat protectant jacket
Fuel pump
Vortech FMU (12:1) with fittings and hoses
Bunch of hose clamps, vacuum hoses, gaskets, and bolts to put everything together.
Spark plugs (suggested gapping of .030, suggested NGK BKR7E, not sure if that's what RRM provides)
* Not included but needed for installation
8mm hex key for oil supply line bolt removal
RTV Blue (or higher) sensor safe silicone
Thread sealant or tape
20w50 non-synthetic oil (suggested by RRM)
91+ octane gas
Lots of zip ties
3/8-18 NPT drill and tap kit
3M Windo-weld (might as well fill your motor mounts while you're at it)
Time, patience, beer
__________________
Electric fan and fittings to mount
Big T-28 turbo
Up pipe
Elbow/Down pipe (from turbo to stock down pipe)
Tial waste gate set to 5psi
Dump pipe for waste gate
Piping from turbo to TB
Piping from filter to turbo
Open element filter
Generic recirculating BOV (may upgrade)
Recirculating pipe from BOV to intake piping
Oil supply line (braided stainless)
3/8 NPT fitting for oil supply line to oil pan
AN fitting from oil supply line to turbo
AN fitting from turbo to oil return line
3/8 NPT fitting for oil return line to oil pan
Oil return line (heavy duty rubber)
Oil return line heat protectant jacket
Fuel pump
Vortech FMU (12:1) with fittings and hoses
Bunch of hose clamps, vacuum hoses, gaskets, and bolts to put everything together.
Spark plugs (suggested gapping of .030, suggested NGK BKR7E, not sure if that's what RRM provides)
* Not included but needed for installation
8mm hex key for oil supply line bolt removal
RTV Blue (or higher) sensor safe silicone
Thread sealant or tape
20w50 non-synthetic oil (suggested by RRM)
91+ octane gas
Lots of zip ties
3/8-18 NPT drill and tap kit
3M Windo-weld (might as well fill your motor mounts while you're at it)
Time, patience, beer
__________________
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
CombatSpeed
Lancer Aftermarket Forced Induction Tech
22
Jun 15, 2015 10:07 AM
05lanceralliart
04-06 Ralliart Aftermarket Forced Induction Tech
7
Oct 2, 2009 12:04 AM




