ROAD/RACE- Project Lancer begins NOW.
Thread Starter
Former Sponsor
iTrader: (67)
Joined: Dec 2001
Posts: 7,826
Likes: 3
From: Santa Fe Springs, CA.
Hi Perf Motor Mounts are waaaaaaaay better than a dampner. They give uneven support and just make other things break! It is only cool cause when you open the hood you can see it and show it to your friends. That is the only allure to it. Go with the motors mounts only! IT will dave a ton of other compnents. Damper will kill other stuff.
ROAD/RACE
ROAD/RACE
Evolved Member
Joined: Oct 2008
Posts: 641
Likes: 0
From: The Salty, UT
would u mind writin a DIY for that, i was jus thinkin last nite bout tryin to drive thru a neighborhood on the dl but ofcourse the ****in drls would ruin that..or tryin to drive in between states at night ****in toppin out 140 145 like redline stylie lol..so ya, jus a quick DIY if possible
okay heres what I did,
you are going to need these supplys,
2 40 amp releys
wire Cutter/strippers
proper fittings
Zip ties
1 hr max time lol
YOU WILL HAVE TO CUT 2 WIRES IN EACH HEADLIGHT
I took the Blue Wire going to the parking light the little amber blub or led you have and spliced it, the I cut the red/white wire going the the lowbeam. heres the Diagram below so you know what im talking about. Very Simple. this cut out all of my lights, when I turn the switch 1 time it puts the drls on along with the parking lights, 2 click is full lights, and fogs are the same..... time for HIDS!
the black box is the back of the reley
you are going to need these supplys,
2 40 amp releys
wire Cutter/strippers
proper fittings
Zip ties
1 hr max time lol
YOU WILL HAVE TO CUT 2 WIRES IN EACH HEADLIGHT
I took the Blue Wire going to the parking light the little amber blub or led you have and spliced it, the I cut the red/white wire going the the lowbeam. heres the Diagram below so you know what im talking about. Very Simple. this cut out all of my lights, when I turn the switch 1 time it puts the drls on along with the parking lights, 2 click is full lights, and fogs are the same..... time for HIDS!
the black box is the back of the reley
Last edited by 08Lancer89; Jan 2, 2009 at 06:23 AM.
Okay so I would like to see some new stuff for the lancer, like poasted above, a CF FRONT LIP!!!! And another CF Rear Lip Design, heck mabe CF Side lips to so we can have a full CF lip, that would be sick!
okay heres what I did,
you are going to need these supplys,
2 40 amp releys
wire Cutter/strippers
proper fittings
Zip ties
1 hr max time lol
YOU WILL HAVE TO CUT 2 WIRES IN EACH HEADLIGHT
I took the Blue Wire going to the parking light the little amber blub or led you have and spliced it, the I cut the red/white wire going the the lowbeam. heres the Diagram below so you know what im talking about. Very Simple. this cut out all of my lights, when I turn the switch 1 time it puts the drls on along with the parking lights, 2 click is full lights, and fogs are the same..... time for HIDS!
you are going to need these supplys,
2 40 amp releys
wire Cutter/strippers
proper fittings
Zip ties
1 hr max time lol
YOU WILL HAVE TO CUT 2 WIRES IN EACH HEADLIGHT
I took the Blue Wire going to the parking light the little amber blub or led you have and spliced it, the I cut the red/white wire going the the lowbeam. heres the Diagram below so you know what im talking about. Very Simple. this cut out all of my lights, when I turn the switch 1 time it puts the drls on along with the parking lights, 2 click is full lights, and fogs are the same..... time for HIDS!
