Tranny wont shift 03 ES
#16
Evolved Member
iTrader: (5)
you don't need any tools at all to bleed the clutch, other than whatever size wrench you need for the bleeder screw, i'm confused...and the clutch control system uses brake fluid, that's why they share a reservoir, you can mix all you want...to bleed the clutch properly, you need to over-fill the reservoir, because the master cylinder will pull fluid from the very top of the reservoir.
#17
Evolving Member
Thread Starter
so.... guess what I did? I measured the pedal height, and it was within spec, I said well, I am going to try it, and see if it changes anyhting.... I adjsuted the push rod, at first, it went closer to the floor, then I went the otehr way and lifted it further away. I thought it went way further away from the floor than where it was originally at.... BUT I measured it again, and it was still within spec!!!! and tranny shifts fine now.... so not sure what happened?!
Although, I do now have my SRS light on, but not sure if it is related or not -- don't see how it could be related....
Although, I do now have my SRS light on, but not sure if it is related or not -- don't see how it could be related....
#20
Evolving Member
iTrader: (1)
so.... guess what I did? I measured the pedal height, and it was within spec, I said well, I am going to try it, and see if it changes anyhting.... I adjsuted the push rod, at first, it went closer to the floor, then I went the otehr way and lifted it further away. I thought it went way further away from the floor than where it was originally at.... BUT I measured it again, and it was still within spec!!!! and tranny shifts fine now.... so not sure what happened?!
Although, I do now have my SRS light on, but not sure if it is related or not -- don't see how it could be related....
Although, I do now have my SRS light on, but not sure if it is related or not -- don't see how it could be related....
#21
Evolving Member
Thread Starter
why? I really doubt it... it has been perfectly fine since I adjusted the pedal
I guess later this week, I can pull the panel underneath and look in there.....
I do need to change my oil
I guess later this week, I can pull the panel underneath and look in there.....
I do need to change my oil
#22
Evolving Member
iTrader: (1)
[QUOTE=jimbo74;11657309]why? I really doubt it... it has been perfectly fine since I adjusted the pedal
I guess later this week, I can pull the panel underneath and look in there.....
I do need to change my oil[/QUOTE
oh sorry i totally missed that part where you said it got fixed, i've had a lockout issue due to a bent finger on the pp and it wouldn't come out of gear, thats why i chimed in
I guess later this week, I can pull the panel underneath and look in there.....
I do need to change my oil[/QUOTE
oh sorry i totally missed that part where you said it got fixed, i've had a lockout issue due to a bent finger on the pp and it wouldn't come out of gear, thats why i chimed in
#24
Evolved Member
iTrader: (5)
If it's an ACT clutch, then it's definitely possible...I had an ACT HD pressure plate break 4 or 5 fingers off, and it flung two of them straight through my transmission case...found them both laying underneath the differential...though when that happened, the sound it made was ungodly, and I was still able to shift. limped it home dry. kept the pieces as souvenirs...ACT requested the clutch back for inspection and I never heard from them again, rotten bastards...ended up getting another ACT, derp!
#25
Evolving Member
iTrader: (1)
If it's an ACT clutch, then it's definitely possible...I had an ACT HD pressure plate break 4 or 5 fingers off, and it flung two of them straight through my transmission case...found them both laying underneath the differential...though when that happened, the sound it made was ungodly, and I was still able to shift. limped it home dry. kept the pieces as souvenirs...ACT requested the clutch back for inspection and I never heard from them again, rotten bastards...ended up getting another ACT, derp!
#26
Evolved Member
iTrader: (5)
anyway you may want to sit down for this one, it's bad...
https://www.evolutionm.net/forums/04...l#post11167011
Thread
Thread Starter
Forum
Replies
Last Post
WRX 2 EVO
Evo Engine / Turbo / Drivetrain
3
Mar 15, 2005 06:35 AM