I have 3 questions, I won a 2003 Mits Lancer OZ-Rally, 1st one is HKS Super AFR, i have it all hooked up to the ECU but there is one blue wire coming from my AFR controller what does it go to, to? My 2nd question is where is my Oil Pump located? i have to put put a blug on it to fit to a -4 90 deg. Fitting connected to metal fiber hose that is connected to another 90 deg. -4 fitting to the top of my turbo, do u know a good way to put this plug in my oil pump? My finnal question is at the bottom of my turbo there is an oil return hose now i think i need to put a bung or a bunt in my oil pan and connect it to my oil return hose, any suggestions?

 

Sorry i own one i did not win one

 

dude its really hard to understand what you're saying. if you want some good help i'd call rmr or rrm

 

sorry for the mis'understandment, but all i need to know where is the oil pump located on the us lancer, and if anyone knows about HKS's Super AFR (Air/Fuel/Ratio) Controller. and know what they hooked up the blue wire to then i would be most greatfull. thnx

 

i think you should just call RMR or RRM also. i think they'd be happy to help. (OT) are you new to the US?

 

Do you already have a wire hooked up to the Throttle positioning sensor (TPS) wire? The eManage doesn't tell you to do this but it's vital- I don't know if the HK$ AFR needs to measure this, but that's about all I got for ya
if you think that might be it, look for Rhyzin's "SAFC install" post in the US Lancer how-to/installs section- he has a pretty picture with all the basic wires labeled.

 

yes i have one hooked up to it, i think it might be a wire to the bypass wire of the yellow wire and orange wire that comes from the ARR. My buddy siad it might also be a 2nd or backup ground, the wire i have nothing to hook to, HKS installment guide doesent say anything about that wire..... it might be hooked up right and there is an extra wire. I'm not suposed to hook up anything to that O2 Sensor am i? its labled in that picture i got off here, showing where the ECU was and what wires to cut

 

how do i delete a Topic??

 

You don't.