your easy DIY = my hard DIY
alright, im a noobie to most cars and i dont know much about them, but i did get the eyelids installed by myself and being the confident "installer" i was, i tried to install these new silverstars (9007 @ 65/55 wattage). its been 3 hours now and ive gotten the protecting plate unlocked but now it stands with the stock bulb..
it seems i cannot get the bulb out of the socket.. and ive looked inn the owners manual, searched around, and used just about everything i know of..
if anyone can help me figure out how to slip the lightbulb out of the headlight socket, please let me know your tips.. i'd like to get them installed and see what they look like tonight
it seems i cannot get the bulb out of the socket.. and ive looked inn the owners manual, searched around, and used just about everything i know of..
if anyone can help me figure out how to slip the lightbulb out of the headlight socket, please let me know your tips.. i'd like to get them installed and see what they look like tonight
Is the bulb still inside the housing, or not? (ie, you've gotten it out and can actually touch the bulb)
By the way, don't EVER touch the bulb.
The bulbs are held on by a little clip. You should be able to pull it up with your finger, but a small screwdriver would also work.
When you install the new bulbs, simply press them onto the mount. Make sure NOT to touch them, or they'll burn out much faster. Stick them back in the housing, turn to lock and voila. You're done.
By the way, don't EVER touch the bulb.
The bulbs are held on by a little clip. You should be able to pull it up with your finger, but a small screwdriver would also work.
When you install the new bulbs, simply press them onto the mount. Make sure NOT to touch them, or they'll burn out much faster. Stick them back in the housing, turn to lock and voila. You're done.
Other that gently prying with a screwdriver, there isn't much you can do. Perhaps getting a wide set of pliers around the bulb housing (the plastic, obviously) and wiggling it might also help.
The bulbs should be quite snug, but not impossible to remove. If you seriously have no chance in removing them, take the car back to the dealer and have them do it.
And be careful with that clip, or your break it like I did.
The bulbs should be quite snug, but not impossible to remove. If you seriously have no chance in removing them, take the car back to the dealer and have them do it.
And be careful with that clip, or your break it like I did.
Trending Topics
alright i gotta it installed eventually by myself.. i just used some pliers to loosen it out of there
i'll post some pics of the sylania silverstars once i get them from my digital camera to my computer.. they look extremely bright.. and i dont know if thats a good thing.. seems like it would be an annoyance to others on the road since it looks like i have my brights on while riding
i'll post some pics of the sylania silverstars once i get them from my digital camera to my computer.. they look extremely bright.. and i dont know if thats a good thing.. seems like it would be an annoyance to others on the road since it looks like i have my brights on while riding
and if you want some silverstars for a really cheap price go here...https://www.evolutionm.net/forums/sh...391#post856391
Thread
Thread Starter
Forum
Replies
Last Post
FiReBReTHa
Lancer How Tos / Installations
0
Jul 18, 2016 08:05 PM
aggieEVO
Evo Tires / Wheels / Brakes / Suspension
4
Sep 21, 2015 07:03 AM




