Notices
Lancer Troubleshooting Get help with any troubleshooting problems you may have.

RPM Dips

Old Mar 11, 2013 | 06:38 PM
  #1  
AppleCheese's Avatar
Thread Starter
Newbie
 
Joined: Feb 2013
Posts: 3
Likes: 0
From: Vancouver BC
RPM Dips

So this has been happening for the past week or so,

The car idles fine at ~600-700 rpm and when I apply gas it goes up fine, the only problem is that when the car is moving and I do not apply gas, the rpm goes from around 1200-1500 down to 500-600 then back up to normal in about a second. There is a noticeable slow down when it does this.

Spark plugs were just changed,

I just bought this car 2 months ago second hand, has 103 XXX kms on it.

All fluids seem to be fine.

Any help would be nice
Reply
Old Mar 12, 2013 | 12:12 AM
  #2  
invecs's Avatar
Newbie
iTrader: (4)
 
Joined: Mar 2009
Posts: 77
Likes: 0
From: cali
this is also happening to me. even my mechanic/handyman cant figure it out.
Reply
Old Mar 24, 2013 | 03:00 AM
  #3  
AppleCheese's Avatar
Thread Starter
Newbie
 
Joined: Feb 2013
Posts: 3
Likes: 0
From: Vancouver BC
bump

bump
Reply
Old Mar 28, 2013 | 01:28 AM
  #4  
Ellimist55's Avatar
Newbie
 
Joined: Apr 2012
Posts: 22
Likes: 0
From: Arizona
Sounds like a bad throttle position sensor you can check it with a dmm if you know what your doing the best thing to use is a lab scope
Reply
Old Apr 1, 2013 | 10:51 AM
  #5  
03lances's Avatar
Evolved Member
iTrader: (14)
 
Joined: Oct 2006
Posts: 3,714
Likes: 2
From: West Coast WA
First thing I would do is get throttle body cleaner and maf cleaner. Always start with the cheapest methods . Its common on our cars that the throttle body can get gummed up and since the IAC motor is right there this can cause a momentary dip in idle when coming to a stop as the IAC cannot compensate fast enough once the rpms drop initially.
Reply
Old Apr 3, 2013 | 08:47 AM
  #6  
fatboy123's Avatar
Newbie
 
Joined: Apr 2013
Posts: 5
Likes: 0
From: Kuwait
I just posted in another part of this forum regarding my car with similar problem as yours, I've attached a 15 second video to this post...

https://www.evolutionm.net/forums/la...ng-glitch.html

Can you please verify that my problem is the same as yours? if so, could you please please please update me if you solve your problem?

Thanking you in advance.

Bobak.
Reply
Old Apr 4, 2013 | 09:00 AM
  #7  
AppleCheese's Avatar
Thread Starter
Newbie
 
Joined: Feb 2013
Posts: 3
Likes: 0
From: Vancouver BC
Originally Posted by fatboy123
I just posted in another part of this forum regarding my car with similar problem as yours, I've attached a 15 second video to this post...

https://www.evolutionm.net/forums/la...ng-glitch.html

Can you please verify that my problem is the same as yours? if so, could you please please please update me if you solve your problem?

Thanking you in advance.

Bobak.
Hey, no that seems like a different problem, my car idles fine. The problem is when I am traveling at speed and dont apply gas, mostly on turns, then it dips and the dip is greater than yours more in the 300-400 rpm region. I'm going to try some seafoam to see if that cleans out some stuff when i have the time.
Reply
Old Apr 18, 2013 | 01:28 PM
  #8  
Hatcher686's Avatar
Newbie
 
Joined: Nov 2012
Posts: 4
Likes: 0
From: Colorado
Check the coil cables to the spark plug. One of the rubber plugs could be arching (grounding out) against the head cover. This happened to me and once I replaced them, it didnt "dip" at all. just pull the caps to the spark plugs and inspect for any white markings outisde and inside the cap. If there is white markings then there is your problem. But this is just one solution, Im just giving ideas of what it could be. Sometimes its the simplest thing that will throw everything off. Hope his helps
Reply
Old Apr 19, 2013 | 08:01 AM
  #9  
02modlanceroz's Avatar
Evolved Member
iTrader: (2)
 
Joined: Sep 2009
Posts: 906
Likes: 14
From: Latrobe, Pa
I had the same problem on my foxbody mustang. it was a bad throttle position sensor. you should be able to use a multimeter and check the voltage on the sensor to make sure it is working properly.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
youra6
Evo General
3
Dec 21, 2016 12:54 PM
youra6
Evo Engine / Turbo / Drivetrain
2
Dec 13, 2016 09:00 AM
metallman
Evo General
6
Jan 26, 2016 06:11 AM
V8HAHA
Evo Engine / Turbo / Drivetrain
6
Oct 17, 2013 06:05 PM
smokedmustang
General Engine Management / Tuning Forum
4
Aug 17, 2006 06:45 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 05:00 AM.