Va Beach EVO's
Took a trip to williamsburg on friday and apparently my clutch is now pretty much gone from what i can decipher with my minimal knowledge and evom help. Anybody know somewhere local i can get a new one or order it and somewhere local to install it? I know its not goig to be cheap but im looking for an aftermarket clutch but nothing big everything is stock and i dont ever plan on having a whole lot ever done other than maybe headers exhaust and a cai. Thanks for any advice.
i considered that, im not sure but i think stock clutch is 400 something..i found an ACT Evolution VIII & IX Heavy Duty Street Disc Clutch for like 100 more and hopefully it will last longer. I honestly dont know this is the first time ive ever had to replace a clutch
I replaced my stocker w/a stock clutch and resurfaced flywheel. Cost me about $600 with the price of installation @ ALL ASPECTS (Amazing guys). Look around for a stock clutch used. It is what I did and I got it with around 2k miles on it w/a flywheel. There are usually a couple low milage stock clutches if you look hard enough. Good luck!
I replaced my stocker w/a stock clutch and resurfaced flywheel. Cost me about $600 with the price of installation @ ALL ASPECTS (Amazing guys). Look around for a stock clutch used. It is what I did and I got it with around 2k miles on it w/a flywheel. There are usually a couple low milage stock clutches if you look hard enough. Good luck!
I'd be willing to let it go for pretty cheap.
oorrr if you do go aftermarket, buy my Exedy! Haha.
had my clutch done done at all aspects about 15000 miles ago and still holding strong. guys are good and turnaround was 5 hours. paid 400 about a year ago dont know if their prices went up or down though.
Yeah i caught that the cost of labor now is 525. Not to keep draggin this out sry guys i just added avideo..first video ever so if prolly sucks but it just shows in gear and not going anywhere because im terrible at explanations. http://www.youtube.com/watch?v=eSVMAtOQfck
Last edited by Skott2k; Apr 6, 2009 at 01:21 PM.
When you all meetin up again? Aside from June 5th...have yet to talk to any Evo owners in person (only Sti's while driving) who are pretty humble actually.
Last edited by Dan0805; Apr 13, 2009 at 02:38 PM.
Just dropped my car off this weekend at CBRD in PA. They are going to be installing the BBK FULL (ported), Kelford 272 cams with supertech springs and retainers and pte 780 cc injectors. Will be running 26 psi on pump gas and should see around 370 whp on their dyno ((stock 03 evos put down around 190 on their dyno). I cant wait to drive it. sucks that i have to wait like 3 weeks cause they are backed up right now with other cars.




