Worcester/Boston Social Thread
this is what i picked up: http://www.sonystyle.com/webapp/wcs/...52921665406620
hey tiago, can you get me a swivel mount on the cheap? thanks buddy!
hey tiago, can you get me a swivel mount on the cheap? thanks buddy!
I'm rockin' the 40" W series Sony right now and it's pretty ****.
Monoprice is one of the first places I'd look for a cantilever mount
Newbie
Joined: Aug 2007
Posts: 5
Likes: 0
From: old testament god of the squirrels
I actually got laid off from there after being there for a year, its ok thought one lost job just opened up a whole new opportunity and I got a job at Herb Chambers Honda on Route 9 Westborough in the Internet Marketing dep, and I love it there. How did you know I used to work at Bose?
Damn, I wish we knew that before I left. We could have checked it but the cable is installed according to the AEM booklet so it should work unless, one of the connections come apart which it shouldn't since its soldered, shrink wrapped and then tapped. If you guys have any problems, I can simply stop by and fix it or I can stop by your house on friday Ajay if you can hook your laptop up to the cable we installed to make sure it works.
Nothing beat having fun in the snow today though. I gotta do that more often.
Nothing beat having fun in the snow today though. I gotta do that more often.
Next time we go out in the snow lets hope for some day light and I'll actually get out of the car to snap pictures.
Damn, I wish we knew that before I left. We could have checked it but the cable is installed according to the AEM booklet so it should work unless, one of the connections come apart which it shouldn't since its soldered, shrink wrapped and then tapped. If you guys have any problems, I can simply stop by and fix it or I can stop by your house on friday Ajay if you can hook your laptop up to the cable we installed to make sure it works.
Nothing beat having fun in the snow today though. I gotta do that more often.
Nothing beat having fun in the snow today though. I gotta do that more often.
I don't doubt your abilities but i have twice seen these installed wrong, one where i grabbed the wrong wire even after testing it and once where the wrong type of connector was used, female instead of male. I have three people including ajay that want their cars tuned this weekend so i want to make sure neither of us waste time if something doesn't work.
Turco Tuning!! 
Thread Starter
Evolving Member
iTrader: (7)
Joined: Jun 2007
Posts: 359
Likes: 0
From: Northborough, MA
I actually got laid off from there after being there for a year, its ok thought one lost job just opened up a whole new opportunity and I got a job at Herb Chambers Honda on Route 9 Westborough in the Internet Marketing dep, and I love it there. How did you know I used to work at Bose?
. Either should work for my TV. Thanks for looking for me though!The W is hot. That's what I originally went in to look at - its very comparable to the 650 Samsung, just wanted to consider more options before committing to the 650. Obviously I saw the good deal on the V and just went with it. I believe the only real difference is the V isn't 120 Hz. W might have a better CR too.
Thread Starter
Evolving Member
iTrader: (7)
Joined: Jun 2007
Posts: 359
Likes: 0
From: Northborough, MA
Thread Starter
Evolving Member
iTrader: (7)
Joined: Jun 2007
Posts: 359
Likes: 0
From: Northborough, MA
Hold on... The aem book says to use a female connector which is what ajay got and we connected. Are you saying we're gonna need to get a male to male cable now? If so ill go to radioshack after work today and pick up that cable since I made the mistake of installing it according to the aem booklet and didn't double check what you needed. Or if that won't work and ajay is free on friday ill swap the cables out.
Last edited by 19DB794; Feb 19, 2009 at 06:06 AM.
Thread Starter
Evolving Member
iTrader: (7)
Joined: Jun 2007
Posts: 359
Likes: 0
From: Northborough, MA
Thread Starter
Evolving Member
iTrader: (7)
Joined: Jun 2007
Posts: 359
Likes: 0
From: Northborough, MA
Hold on... The aem book says to use a female connector which is what ajay got and we connected. Are you saying we're gonna need to get a male to male cable now? If so ill go to radioshack after work today and pick up that cable since I made the mistake of installing it according to the aem booklet and didn't double check what you needed. Or if that won't work and ajay is free on friday ill swap the cables out.
if you cant find one, you guys can borrow mine.
Thread Starter
Evolving Member
iTrader: (7)
Joined: Jun 2007
Posts: 359
Likes: 0
From: Northborough, MA
if not - you guys can use mine. turco and ajay know my number. its just sitting in my car. i really have no use for it until turco tunages me.
just ordered the aluminum mount
just ordered the aluminum mount