lol, "hella-sunken"


Dan, I dare you to try and correct some of the grammar in that thread.

 

 

 

^^please post that in the other thread. "get get" and some of the other language should be corrected, dan would you be a dear? kthanks

 

Pete, found those pics Perry took @ the PCA event. check it:

http://www.flickr.com/photos/autox4u...7626861474951/

 

I no has access to flicker here at work, will check them out when I get home. Thanks for posting the link.

 

I would post up the pics of our cars but I can't figure out how to do it without getting a red x.

 

Pce richards and carter!

 

All this half stanced hella flush talk makes the think of giflite fish

 

so I replaced all four calipers and all four brake lines- yet whenever i press the brake pedal you hear cracking noises in both front calipers. SAME AS BEFORE WTF

 

Do i grease the pins?

 

Yes grease pins and any metal to metal areas. I also did the shim pads and back of pad. Don't go crazy but spread it around. Chances are something is rubbing without grease and cause noise. You still have the stock shims right?

 

I have Hella lights on my truck, maybe I should go post in that thread too.

 

hmm
I got stock shims and i have some shims that came with a set of hawk hps pads - strangely they only cover 50% of the back of the back (like diagonally cut shims)
I should take off the wheel and grease everything up- including my entire body.

http://www.youtube.com/watch?v=DaGPJ67jA6A

 

Just turn your radio up.

I never grease mine, just clean them up real good with some steel wool. I get some noise from my pads when they first get compressed. I chalked it up to running pads for a STi, as the Carbo's thickness is different between the two cars eventhough its the same dimensionally.

Do it!