Mark this thread as Unsold
[FS] 2003 evo 8, TB, Big turbo, new trans, built bottom end
Sep 28, 2015, 02:46 PM
#1
Evolved Member
Thread Starter
iTrader: (13)
Join Date: Jan 2013
Location: new mexico
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
2003 evo 8, TB, Big turbo, new trans, built bottom end
So i have been toying with the idea of putting my evo up for sale since i hardly drive her while i am at school and it would be nice to see her go to a good home where she will be appreciated and actually driven. To start off this car has been my BABY for the past 2 years, i care about this car as much as most people care about their kids.
The oil has been changed religiously every 3000 miles with the dif and transmission fluid being changed every 6k miles.
ill start with the good things and then move on to the little things that bug me about the car.
CURRENTLY THE CAR IS TUNED AT 26PSI ON 91 PUMP GAS MAKING 463/415 AT THE WHEELS. THE TURBO ON THE CAR IS EASILY CAPABLE OF AROUND 600WHP ON E85. yes i have dyno sheets also
TIMING BELT WAS JUST CHANGED BY JACKS TRANSMISSION! I have all the receipts for this as well.
ASKING 16.5k OBO
Vin: JA3AH86F63U122803
Modifications:
Engine: odometer reads 99.8k but the motor was rebuilt at 69k miles so about 30k miles.
Bottom end is fully built.
Weisco Pistons
Manley Turbo Tuff I Beam Rods
ACL Rod and Main bearings
kiggly dual valve springs
manley valves
Still a 2.0 Liter motor since I wanted to raise the redline if I felt the need.
Buschur racing 272 camshafts
Buschur catch can
Turbo Setup:
JB Fp Black turbo setup.
(Compressor wheel - 82HTZ
Flow rating - 68LB per minute
CW Measurements - 59.1MM Inducer / 82MM Exducer
TW Measurements - 67.3MM Inducer / 58.8MM Exducer
Compressor Housing - 84MM Flow Advancement Port Cover)
turbosmart 18psi wastegate
FP oil feed line feeding off the housing
Transmission:
The prior owner showed me receipts that the transmission was built by Buschur Racing however I was getting some 3rd and 4th gear lockout so i had the synchros replaced.
BRAND NEW synchrotech CARBON synchros installed by Jacks Transmission less then 500 miles ago. They also checked the gear set for chipping or any problems and everything was given the ok.
Competition Push style Twin Disc clutch also installed by Jacks Transmission at the same time as the synchros.
Jacks is a shop in colorado springs that specializes in Evos and GTRs.
Buschur Underhood shifter bushings
Torque solutions short shifter
torque solutions shifter base bushings.
Razo Heavy shift knob.
Exhaust:
buschur ported and coated stock exhaust manifold
buschur catless downpipe
buschur bullet cbe
Toxicfab O2 dump(downward facing). for those of you that havent seen collins work at Toxicfab his work is phenomenal and each piece is hand ported.
Cooling:
Buschur 4in thick race fmic
buschur licp
buschur uicp
Tial BOV tuned VTA
Other Engine Mods:
spoolinup coil over plug ignition system.
Buschur short route intake
Fuel System:
Buschur double pumper fuel pump, twin walbro 255
FIC 1150cc injectors at ~73% duty cycle on the pump gas tune.
i also have some 1600cc injectors that can be included for e85.
Gauges:
prosport oil temp, oil pressure and boost gauge
AEM afr gauge
Random Modifications:
GENUINE mitsubishi JDM rear bumper painted factory tarmac black
demonwerks rear crash beam
evo 7 valve cover
evo 7 tail lights (genuine not knockoffs)
EVO x leather recaro seats
Doluck style front lip
Factory wing has been removed
Rims and Tires:
18x9 Konig Milligrams
sport comp2 tires.
Suspension:
BC BR Coilovers
So now for the bad things,
1) there are 2 chips in the windshield from random rocks that i have not had repaired yet but they are small no cracks or anything significant.
2) since the evo x seats are not bolt in I had to fabricate the brackets to get them to fit, because of this the seats on the driver side is difficult to scoot forward and back. I am 6ft tall and can comfortably drive in it but if youre any taller it might be a tight fit.
3) the trunk is plastidipped black, when i took off the badges there was still an outline of them so i decided to plastidip it. Also the wing holes are covered with vinyl stickers and then plastidipped over so theres no leak.
4) there is a small oil leak that i cannot for the life of me find the source of, Jacks has assured me not to worry about it but i want to be open to someone who is interested in the car.
Title is in hand I'm open to offers I'm gonna put her up at 16.5k OBO.
Car is located in Lubbock Texas
Cheers
Colton
Now the pics
The oil has been changed religiously every 3000 miles with the dif and transmission fluid being changed every 6k miles.
ill start with the good things and then move on to the little things that bug me about the car.
CURRENTLY THE CAR IS TUNED AT 26PSI ON 91 PUMP GAS MAKING 463/415 AT THE WHEELS. THE TURBO ON THE CAR IS EASILY CAPABLE OF AROUND 600WHP ON E85. yes i have dyno sheets also
TIMING BELT WAS JUST CHANGED BY JACKS TRANSMISSION! I have all the receipts for this as well.
ASKING 16.5k OBO
Vin: JA3AH86F63U122803
Modifications:
Engine: odometer reads 99.8k but the motor was rebuilt at 69k miles so about 30k miles.
Bottom end is fully built.
Weisco Pistons
Manley Turbo Tuff I Beam Rods
ACL Rod and Main bearings
kiggly dual valve springs
manley valves
Still a 2.0 Liter motor since I wanted to raise the redline if I felt the need.
Buschur racing 272 camshafts
Buschur catch can
Turbo Setup:
JB Fp Black turbo setup.
(Compressor wheel - 82HTZ
Flow rating - 68LB per minute
CW Measurements - 59.1MM Inducer / 82MM Exducer
TW Measurements - 67.3MM Inducer / 58.8MM Exducer
Compressor Housing - 84MM Flow Advancement Port Cover)
turbosmart 18psi wastegate
FP oil feed line feeding off the housing
Transmission:
The prior owner showed me receipts that the transmission was built by Buschur Racing however I was getting some 3rd and 4th gear lockout so i had the synchros replaced.
BRAND NEW synchrotech CARBON synchros installed by Jacks Transmission less then 500 miles ago. They also checked the gear set for chipping or any problems and everything was given the ok.
Competition Push style Twin Disc clutch also installed by Jacks Transmission at the same time as the synchros.
Jacks is a shop in colorado springs that specializes in Evos and GTRs.
Buschur Underhood shifter bushings
Torque solutions short shifter
torque solutions shifter base bushings.
Razo Heavy shift knob.
Exhaust:
buschur ported and coated stock exhaust manifold
buschur catless downpipe
buschur bullet cbe
Toxicfab O2 dump(downward facing). for those of you that havent seen collins work at Toxicfab his work is phenomenal and each piece is hand ported.
Cooling:
Buschur 4in thick race fmic
buschur licp
buschur uicp
Tial BOV tuned VTA
Other Engine Mods:
spoolinup coil over plug ignition system.
Buschur short route intake
Fuel System:
Buschur double pumper fuel pump, twin walbro 255
FIC 1150cc injectors at ~73% duty cycle on the pump gas tune.
i also have some 1600cc injectors that can be included for e85.
Gauges:
prosport oil temp, oil pressure and boost gauge
AEM afr gauge
Random Modifications:
GENUINE mitsubishi JDM rear bumper painted factory tarmac black
demonwerks rear crash beam
evo 7 valve cover
evo 7 tail lights (genuine not knockoffs)
EVO x leather recaro seats
Doluck style front lip
Factory wing has been removed
Rims and Tires:
18x9 Konig Milligrams
sport comp2 tires.
Suspension:
BC BR Coilovers
So now for the bad things,
1) there are 2 chips in the windshield from random rocks that i have not had repaired yet but they are small no cracks or anything significant.
2) since the evo x seats are not bolt in I had to fabricate the brackets to get them to fit, because of this the seats on the driver side is difficult to scoot forward and back. I am 6ft tall and can comfortably drive in it but if youre any taller it might be a tight fit.
3) the trunk is plastidipped black, when i took off the badges there was still an outline of them so i decided to plastidip it. Also the wing holes are covered with vinyl stickers and then plastidipped over so theres no leak.
4) there is a small oil leak that i cannot for the life of me find the source of, Jacks has assured me not to worry about it but i want to be open to someone who is interested in the car.
Title is in hand I'm open to offers I'm gonna put her up at 16.5k OBO.
Car is located in Lubbock Texas
Cheers
Colton
Now the pics
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: 2003 Built Evo(needs bottom end)
GSX_TO_EVO
For Sale - Cars For Sale
3
Jun 9, 2016 08:35 AM
metalsaber
Evo Engine / Turbo / Drivetrain
2
Mar 30, 2010 10:43 AM
TopLevelPerformance
For Sale/WTB - Engine / Drivetrain / Power
1
Dec 18, 2007 07:35 AM
djevoawhp
For Sale - Cars For Sale
18
Nov 3, 2006 08:33 PM
djevoawhp
For Sale - Cars For Sale
1
Sep 15, 2006 12:57 AM