Front emblem removal IX without bumper removal
Thread Starter
Evolving Member
iTrader: (4)
Joined: May 2006
Posts: 127
Likes: 0
From: Milwaukee area WI
Originally Posted by eve-slow
There will be a hole in the grill piece if you remove the emblem. Not a good look.
Originally Posted by Ink
Is there a way to remove the front emblem on a Evo IX without removing the front bumper?
1. Grab a stubby phillips or similar length screwdriver.
2. Remove top plastic clips.
3. Gently pull up on top of grill and slide your other hand in between. Hold the screwdriver by your finger tips.
4. Remove 1 each screw, slightly pull up on emblem and remove. Might be a pain in the **** to retrieve the screw so don't drop it.
5. There isn't a hole in the grill but there is a plate there. You'll know what I'm talking about after you remove the emblem.
6. Replace top plastic clips.
The plate looks like crap i think some one might be able to cut it off from the back, or that's what i had been hopeing was the case. Once you get it off post how everything went
Trending Topics
Thread Starter
Evolving Member
iTrader: (4)
Joined: May 2006
Posts: 127
Likes: 0
From: Milwaukee area WI
Originally Posted by EvoSid
Yes.
1. Grab a stubby phillips or similar length screwdriver.
2. Remove top plastic clips.
3. Gently pull up on top of grill and slide your other hand in between. Hold the screwdriver by your finger tips.
4. Remove 1 each screw, slightly pull up on emblem and remove. Might be a pain in the **** to retrieve the screw so don't drop it.
5. There isn't a hole in the grill but there is a plate there. You'll know what I'm talking about after you remove the emblem.
6. Replace top plastic clips.
1. Grab a stubby phillips or similar length screwdriver.
2. Remove top plastic clips.
3. Gently pull up on top of grill and slide your other hand in between. Hold the screwdriver by your finger tips.
4. Remove 1 each screw, slightly pull up on emblem and remove. Might be a pain in the **** to retrieve the screw so don't drop it.
5. There isn't a hole in the grill but there is a plate there. You'll know what I'm talking about after you remove the emblem.
6. Replace top plastic clips.
Im sorry EvoSid but there is holes 3 holes behind the emblem. I just found this out the hard way.
The plate will come out with the grill if you replace the grill.
Does anyone make a replacement grill that would match the factory grill for this application?
well, I have done another search and I can nopt find any answers to the questions of "where do you get a replacement grille without holes" since it seems from a couple comments that there are 3 holes in the grille once the emblem is removed on the evo 9. I have seem cars out there without the emblem. So, does anybody sells a replacement grille without holes, or do you just have to make one?
Thread
Thread Starter
Forum
Replies
Last Post
dtrackstar
Evo Show / Shine
16
Jul 30, 2009 01:24 AM
boostin@27
Evo Show / Shine
9
Aug 10, 2007 03:27 PM




