For the month of October we are running a special on our Stage 3 stroker and 2.0 shortblocks. This applies to EvoM members only who place their order between Oct.1 and Oct.31. When you order you MUST mention that you're a member to qualify. Special price does not apply to custom orders and is valid while supplies last.

For detailed information on what goes into our shortblocks, view this thread;
https://www.evolutionm.net/forums/sh...d.php?t=334949

For information on our JAM Spec Venolia pistons, view this thread;
https://www.evolutionm.net/forums/sh...d.php?t=367991

Stage 3 2.0L;
Your block is hot tanked, fully cleaned and inspected then the cylinder walls are sonic tested for thickness. Then it is precision square decked, bored and 4-step torque plate honed. The block is de-burred and the oil galleys are modified. Once the machine work is complete the block is final washed and all clearances are measured and recorded and your rings are fit to the cylinders. The rotating assembly is then balanced and all parts are final washed. Balance shaft elimination kit is installed along with the oilers, new freeze plugs and galley plug. The shortblock is then assembled, painted and ready for delivery.
Parts included;
Brand new JAM crankshaft
ARP Main Studs
Oliver billet rods
JAM Spec Venolia pistons
Coated ACL Rod, Main and Thrust bearings
JAM Ultra file fit ring set
JAM Balance Shaft Elimination Kit
New freeze plugs and galley plug

Special price is $3565

Stage 3 2.3L;
Your block is hot tanked, fully cleaned and inspected then the cylinder walls are sonic tested for thickness. Then it is precision square decked, bored and 4 step torque plate honed. The block is de-burred and the oil galleys are modified. Once the machine work is complete the block is final washed and all clearances are measured and recorded and your rings are file-fit to the cylinders. The rotating assembly is then balanced and all parts are final washed. Coated balance shaft bearings are installed along with the oilers, new freeze plugs and galley plug. The shortblock is then assembled, painted and ready for delivery.
Parts included;
Brand new JAM 2.3 Stroker crankshaft
ARP Main Studs
Oliver billet rods
JAM Spec Venolia pistons
Coated ACL Rod, Main and Thrust bearings
JAM Ultra file fit ring set
New freeze plugs and galley plug

Special price is $3575

Please visit our website, www.jacksonautomachine.com
To view our shortblocks and components, https://www.jacksonautomachine.com/h...m?sectionId=31

 

Price with or without core?

 

At the top it says, YOUR BLOCK....Core.

 

That's the price if we use your core block. There is also the option of using a new block which we can supply. If you purchase the block the same time we do the build we will take $200 off the cost of the new block as well which would make it $1600.

 

thought your strokers retain the balance shafts. is this a new change or a typo?

 

..

 

typo Thanks for pointing that out. We retain the shafts in the strokers

 

I'm very interested....... but I might have to order close to Oct. 30th. FTL!!!

 

So only the 2.3 strokers retain the balance shafts?
So on the 2.0, the balance shafts are removed?



So how much HP can this block handle?

 

^bump?