EvoTio

iTrader: (10)

I've been running a 50/50 mix on my Talon AWD for many years and also on my Evo for several years. I have to agree with esevo that it is the best of both worlds. I have never run pure methanol nor will I ever because of safety issues. If you click on my HFS-5 thread in my sig you can see some of my latest results I've achieved. You just have to tune the 50/50 mix a little different.

cij911

iTrader: (14)

^^ OK thanks...I'll try adding H2O and see if I gain power (can add more boost or timing)...

EvoTio

iTrader: (10)

Remember that water injection loves lean A/F ratios to make the best power. I hope you have a very good water/alcohol system with a good fail safe incorporated if you want to continue experimenting.

esevo

iTrader: (11)

Also go back to the drawing board with your tune. Also consider changing jets. Make sure its distilled water, take your time and log as much as you can. I promise you will see the results in time.


Evan Smith

cij911

iTrader: (14)

^^ Thanks guys...The kit is an SMC v2 (progressive) -- I know it may not be of the same quality as Aquamist, but has worked fine for many...My failsafe is a boost solenoid connected to my Zeitronix wideband, which I hope is sufficient. I will also be loading the Tephra mod v5 soon to switch maps upon certain knock criteria.

QQ -- I am using an M10 or MW10 (10 gallons / hr) nozzle, should I change to a smaller nozzle?