need Help removing front block cover
#1
Newbie
Thread Starter
Join Date: Nov 2011
Location: Lowell,MA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
need Help removing front block cover
Looking for some advice and how to remove the whole front block cover so I can swap it over to my new block. Any help with be greatly appreciated. Thank you
#5
Newbie
Thread Starter
Join Date: Nov 2011
Location: Lowell,MA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
#7
It's just a matter of nuts and bolts. The serpentine tensioner comes off with 2 bolts, overcenter the pulley with a 1/2" drive breaker bar or ratchet. The gear on the crankshaft should pull off, after that the trigger disc, then the balance shaft gear. Water pump is bolts. Oil filter housing, bolts. Oil pump, more bolts.
With that said, it looks like you've got a bit of corrosion going on, so it may not be as simple as sliding cogs off. PB Blaster and a pulley removal tool should be added to your shopping list.
With that said, it looks like you've got a bit of corrosion going on, so it may not be as simple as sliding cogs off. PB Blaster and a pulley removal tool should be added to your shopping list.
Thread
Thread Starter
Forum
Replies
Last Post
mantosride
Evo Engine / Turbo / Drivetrain
5
Sep 25, 2009 02:19 PM
EvoAlex48
Evo Engine / Turbo / Drivetrain
8
Jul 25, 2009 02:56 PM
dekfu1
Evo How To Requests / Questions / Tips
1
Oct 6, 2006 01:21 PM