AND talking about ALLMOTOR, Hondas produce better # than Mitsus (in this Case Ralliarts)

Sorry if you are a HATER but you cant be allways like that!
You cant say, I will beat any honda on the street
You cant say Hondas dont run if they have the stock engine

BTW those are not handicapped versions, WHY? becase even when the Civic Si or Integra Type R or S200 are top of the line vercions, they still have less engine than the RA have (1.8 - 2.0 - 2.0/2.2)

a comparison of a RA with a Civic DX/EX or what ever, you know who will win, but those arent performance models, just cheap models so you dont have to spend too much on GAS, those are like Lancers ES/DE.

what would be a fair comparison for the RA? a cheap honda car?, a FIT? heheh

ok im over now.
--------------------------------------------------------------------------

Can we Forget about all this "I HATE HONDAS" crap? lets forget page 17

BACK TO THE TOPIC

So, any news? with your project?
Im looking for a RA cil.HEAD, do you know anyone selling one in PR?? i found a ENGINE for $700 (block and head, not manifold of anything else) but i only need the head so if you know anything let me know

 

The point of my comment was out of all the cars I see, and knowing what all those cost, the Hondas in as comparable price range suck nuts. you are getting into the realm of Integra, which whatever you like to think is not Honda. That's why it says Integra on it, because even Honda doesn't want you to call it a Honda. That's why they cost that much more too, because they have that many more creature features than a Honda. You show me ANY import that is as cheap and as fast as my car was, and I'll even give you a couple thousand dollars more to spend maybe less than 20k, and I will bow to your superior knowledge. I still bet it won't be a Honda.

just in case you didn't know your choices:

Honda Civic, Honda Accord, Honda S2000, Honda Ridgeline, Honda Odyssey, Honda ..., wait, is that it? Don't all those cost more than 20k? maybe not the dx...

I don't hate Hondas, but none of them are fast for the money.

I saw a cylinder head on car-parts.com in PR for 300 iirc.

 

2004
Engine
Mitsubishi Lancer

exc Evolution; 2.4L (4 Cyl, VIN 'F')-

206048

$350

Number One Auto Parts, Inc. USA-PR(Caguas,-Puerto Rico) E-mail 1-888-744-6800;1-787-747-6800

it was for the whole engine, not the cylinder head.

 

Yeahh I called the same place too when I was @ PR , they told me the engine doesn't have the intake/exhaust manifold but even thou 350 is a neat price if you dont buy it I will once I get back to PR ...


BTW : IF ANYONE SAYS ANYTHING ELSE ABOUT HONDA CRAP I WILL REPORT THE POST, ITS FUN @ FIRST BUT THEN IS LIKE MAKING FUN OF A RETARDED PERSON, SO PLEASE DONT EVEN MENTION IT ...

 

yeah, I would say 350 is a pretty good price for an engine, even without manifolds. damn email I just received on the head was 300, 125 for the IM.

 

egk, you have an identity crisis

 

I'm sure there are plenty of quick hondas out there, none of which I am at all interested in nearly as much as I am Migue's project. We all have the resources to be able to pull up the specs on any honda made as well, so please, lets just get back on topic.


Moving forward, I believe I've found a cheap cyl head here locally and I believe I'm going to start down this road as well.

 

yeah maybe

 

wow, thats a good one, 350, I found 3 but it was 700, thats HALF the price

it is at the other side of the island but for 350 less i think i will check on that

 

yeah it's worth a drive to be sure

 

I am from Aguada , where are you located???

 

Migue, question for you regarding the cryogenics/ceramic treatment.


I realize that the ceramic coatings can be found through the link you provided. Did you have access to the cryogenic stuff at your work? If so, do you think it's at all possible to find a place locally to do that kinda stuff or would it likely need to be shipped off somewhere, if so, where would you suggest?

Second: What is your impression on HPC coating? Here in Utah we have a local facility I could run the head down to. Do you think it would at all be worth it, or just stick with the ceramic treatment....or both? Thanks again.

 

Dear friend I really think with the ceramic you are just fine (just follow the instructions and ou will succeed ....
Heres the link for the crogenics, I noticed I never see you online ..do you have the invisible mode on hehehe , remember I am a ninja I can see you .....
Cryogenics

 

Guilty as charged! Some issues in the past kinda motivated me to go invis, I never switched back but I'll do it now. I found a cylinder head here right in town for $250.00 they are pulling it off the car as we speak, I'm quite excited, and with all the info you have provided here I don't know that I'll even have too many annoying questions!

 

Dont worry man , I will try to answer all if not someone else might help me hehehe !!! please verify that the faces of the valve are right and hat there isn't any bent valve or anything...