where does one find all the TSB's? i tryed googling it yesterday but had no luck

 

I don't remember exactly where I got all the information on the TSB's. Mostly used Google and searched here on EvoM and EvoXForums.

 

I have the 2009 RA and temps. have not gotten below 50f. No over boost issues yet. I don't think it's cold enough for possible issues.

 

Why does my 09 RalliArt stock map look like this?

 

Because the xml definition is wrong. Hence the need for the thread I tried to start updating xml stuff. Whats the rom id?

 

I have a question for Bryan. I've noticed that my stock bov releases on the slightest lift in throttle. Sometimes when this happens, the clutches release and the engine revs a bit. For example, 3/4 throttle just after turbo spools up and torque is high, if I lift my foot just a little this will sometimes happen. I wondered if there is anything in any SST tables that would explain this? Sorry to go off topic...

 

Post one for 2009 models and I'd be glad to.

 

53600010: ECU ID

I have tried clearing EcuFlash memory, uninstalling it, then, reinstalling it. to the same affect.

 

Yes if you post it as 2010 AUS / EDM 93 Oct

 

Where can i dl the V1 maps?

 

^ On the first page look for the link that says "Archive of V1" under the current maps.

 

What are the exact differences between the V1 and V2 maps. Is one of these "safer" for colder weather? my weathers get to -20 sometimes.

What does everyone prefer V1 or V2?

 

I just noticed that the V1 maps are COLD REGION. Im assuming that the V2 maps are not adjusted to cold weather yet and i should use the V1 map for this winter.

 

If that were true that would be nice so i wouldn't have to unistall the boost pill.

 

Has anyone ran the V2 maps throughtout winter? IF SO, how was it, any problems???

I will be running it through the winter and keeping an eye on the boosy.