Cobb AccessPort Ralliart install process (ECU)
#31
any of you guys that has the accessport have the original 2010 ralliart stage 1 91 octane map that came with the unit?? I downloaded the 2010 one and installed it to my car and had absolutely no gas pedal response from the engine at all. I reinstalled the stock map that was saved when installing the new map and everything is fine now. I read that someone downloaded maps from the cobb website and he couldn't make it work with his car either. Or can i install the 2009 map that came on the cd on a 2010 ralliart??
#33
Newbie
Thread Starter
Join Date: Aug 2009
Location: Rockford, IL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Cobb!!!
#36
Evolved Member
iTrader: (7)
Join Date: Apr 2010
Location: Rhode Island
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
Well, I am up in Rhode island now, which is my new home for the next couple years, and the diff in temp has made a huge diff in how my RA runs. I am very very happy with how my car is running with the AP. As for those of you that are talking about cobb leaving you in the dark as far as maps, go get yourself a protune and keep it on the ap. That way you can put pretty much any mods on your car you want and have the protune catered to your setup. Not to mention you will get a lot more horsepower. I plan on getting a downpipe and test pipe in the next week or so, already have catback...and running the stage 2 93. The stage 2 map is pretty much why I bought the AP, it nets very large gains over stock and with relatively very little parts required. I will keep you guys posted on the stage 2. I know there is another guy on here out of plano thats running a stage 2 protune, I believe, and he is happy with it.
#37
Evolved Member
iTrader: (7)
Join Date: Apr 2010
Location: Rhode Island
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
Just to update you guys, I set up another thread about cobb ap, called cobb ap question. A guy I have been talking to in Plano is working out details with Cobb to get some more maps for us. Check up on that thread from time to time.
#38
Newbie
Thread Starter
Join Date: Aug 2009
Location: Rockford, IL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
V 1.01 for 2009 RA is out "They are still working on 1.02 for RA 09"
The updates are finally nice to have, seems like COBB doesn't really care about the RA.
#43
Evolving Member
iTrader: (1)
Stock ECU yes but custom tuned by Cobb. As for what voids warranty this is a grey area that you have to check with the local dealer in your area about. Some dealers are more friendly than others depending on the mods you want to do. Since I swapped turbos the answer is most likely no but if you drive the amount of miles I do every year I will be out of warranty by November :-) I just make sure I do all the maintenance per the severe duty schedule and make sure you have a very knowledgeable shop that can take care of you along with a dealer that can also.
Thread
Thread Starter
Forum
Replies
Last Post
eh69758
Mitsubishi TC-SST Discussion
15
Oct 18, 2014 04:14 PM
2010, accessport, clip, cobb, ecu, forum, holder, inmstallation, install, installing, lancer, mitsubishi, ralliart, sportsback, type, vent