got everything but the lowest air pipe off. any help on reaching the bolt to get it off would be appreciated. waiting to get parts tomorrow. pics of my ralliart without the front bumper.

 

Where's the bolt at? Looking good there

 

You talking about the bolt that holds the clamp for the tube onto the turbo?

 

yea that's the one i'm talking about.

 

i don't see why the put it underneath it where there's no room to get at it

 

a lift would probably be the best thing in this situation, but then again, i dont really know any average guy who's got on in their garage. Why did mitsu complicate our lives like this!

 

what i had to do was lay ontop of my car, and reach your hand back there, its a 10mm I now how that one is a *****. thats what I put an old run ontop of my engine I took the engine cover off first, then i layed on there. i got mine off that was the biggest ***** of the whole install.

 

most likely they assembled the engine before the car, and didnt car where the clip was. After all its not supposed to come off lol uunless your going to mod

 

just have to buy another 3" extension and it'll come off. taking off the upper intercooler pipe from the idk what to call it the mess type tube that runs past then engine is a serious pain too. but it has to come off for the intercooler

 

Did you get the uicp too?

 

wish I was up there to help you man

 

yea me too. honestly i'm about to get out the dremel and cut it out piece by piece. it's not needed right?

 

no you dont need that clamp that goes to the turbo AMS gives you new ones, you could to that but if you ever need to go back to stock you will have to order a clamp or just go to a local auto parts store they have them... be carefull cutting

 

How hard was it to get the bumper off????

 

i will. i ran to lowes and the extension was an inch too long. if my parts come today which they should i'll post pics of the intercooler tonight