ECUFlash / Evoscan / Mitsulogger Questions
EvoScan v2.9.0092 is now out to fix this.. press Check for Updates inside EvoScan under help.. this will correct the Load and RPM Axis showing correctly in the MapTracer.. Any problems, let me know.
Cheers,
Hamish.
Newbie
Joined: May 2014
Posts: 13
Likes: 0
From: Summerholm
after teamviewer your pc, I found there was:
multiple copies (x3) of your rommetadata xml folder, old versions of ecuflash and evoscan.
the actual fix was simple.. remove all the duplicate copies of rommetadata xml folders. install the latest clean verison of ecuflash with default XMLs
your ROM is 20030013 JDM Galant VR4.xml and it already comes default as part of the latest ecuflash.
I copied your kenneth mods xml into that file, and named it 20030013 JDM Galant VR4 Kenneth mods.xml
now you are all good to go! it works on both Ecuflash and Evoscan no problems at all.
Cheers,
Hamish.
multiple copies (x3) of your rommetadata xml folder, old versions of ecuflash and evoscan.
the actual fix was simple.. remove all the duplicate copies of rommetadata xml folders. install the latest clean verison of ecuflash with default XMLs
your ROM is 20030013 JDM Galant VR4.xml and it already comes default as part of the latest ecuflash.
I copied your kenneth mods xml into that file, and named it 20030013 JDM Galant VR4 Kenneth mods.xml
now you are all good to go! it works on both Ecuflash and Evoscan no problems at all.
Cheers,
Hamish.
you da man
Newbie
Joined: Apr 2012
Posts: 27
Likes: 0
From: Australia
Hey all, got my very first tactrix cable, ecuflash software and evoscan software. All up to date. But I can't seem to bring up the map / image that is currently on my ecu.
I've an 05 ausdm evo ix that was tuned by someone else, what I want to do is read the current tune and edit it to suit my new perrin intake. I've been doing a bit of reading about MAF scaling etc which seems to be pretty straight forward. Although I'm having trouble reading the current rom that is on the ECU.
When I read the ecu, it saves a .srf file. And it doesn't show any of the data (fuel, air, timing etc). I've tried changing the format to .bin and .hex but they all don't show any data on ecuflash.
How do I go about reading the ecu properly so I can edit the rom?
Thanks
I've an 05 ausdm evo ix that was tuned by someone else, what I want to do is read the current tune and edit it to suit my new perrin intake. I've been doing a bit of reading about MAF scaling etc which seems to be pretty straight forward. Although I'm having trouble reading the current rom that is on the ECU.
When I read the ecu, it saves a .srf file. And it doesn't show any of the data (fuel, air, timing etc). I've tried changing the format to .bin and .hex but they all don't show any data on ecuflash.
How do I go about reading the ecu properly so I can edit the rom?
Thanks
Newbie
Joined: Apr 2011
Posts: 65
Likes: 0
From: Padstow
Can anyone help with a workable logcfg file for an JDM EVO7.
I cannot get my Tactrix OpenPort 2 to log directly to the sd card. All works great with Evoscan to a laptop.
Problem solved and it's working great. I named the logcfg file logcfg.txt.txt
I cannot get my Tactrix OpenPort 2 to log directly to the sd card. All works great with Evoscan to a laptop.
Problem solved and it's working great. I named the logcfg file logcfg.txt.txt
Last edited by Charlescrown; Jul 7, 2014 at 06:24 PM.
Hey all, got my very first tactrix cable, ecuflash software and evoscan software. All up to date. But I can't seem to bring up the map / image that is currently on my ecu.
I've an 05 ausdm evo ix that was tuned by someone else, what I want to do is read the current tune and edit it to suit my new perrin intake. I've been doing a bit of reading about MAF scaling etc which seems to be pretty straight forward. Although I'm having trouble reading the current rom that is on the ECU.
When I read the ecu, it saves a .srf file. And it doesn't show any of the data (fuel, air, timing etc). I've tried changing the format to .bin and .hex but they all don't show any data on ecuflash.
How do I go about reading the ecu properly so I can edit the rom?
Thanks
I've an 05 ausdm evo ix that was tuned by someone else, what I want to do is read the current tune and edit it to suit my new perrin intake. I've been doing a bit of reading about MAF scaling etc which seems to be pretty straight forward. Although I'm having trouble reading the current rom that is on the ECU.
When I read the ecu, it saves a .srf file. And it doesn't show any of the data (fuel, air, timing etc). I've tried changing the format to .bin and .hex but they all don't show any data on ecuflash.
How do I go about reading the ecu properly so I can edit the rom?
Thanks
take a screenshot or reading of the "Port C" B2 to see what the raw data is from PortC
Newbie
Joined: Nov 2011
Posts: 30
Likes: 0
From: Serbia
Yes!
Not sure what is Port C and how to see this data?
Do you mean data during logging in 3rd column "Reading"?
Thanks!
Do you mean data during logging in 3rd column "Reading"?
Thanks!
Newbie
Joined: Apr 2012
Posts: 27
Likes: 0
From: Australia
