Should I hear the injectors click when I test them in the actuator section? Reason I ask is because I had my car started for like 10seconds after my build on 1650's and now I can't get anything. I switched back to 550's and still nothing. No DTC's, but I don't hear anything when I test the injectors. Another question I guess. Is there a different formula for q45 tps sensors?

 

IIRC, no. I think you use that feature when your car is running. I think it only disables the injector for a few seconds.

 

i have a evoscan/tephra question maybe someone can help me with. Are the latest tephra roms pre configured with 2byte load? basically what i am trying to figure out is.. can i open my evoscan version 2.8 and simply click to choose the 2byte load option and successfully log load that way? i notice i can choose from a few load options..i am wondering what is the best to log with if i cant just choose the 2 byte option in evoscan without modifying my rom further? Thanks to anyone who can adivice me.

 

If you're using tephra mod then log 1byte load. I think you have to manually add it to evoscan, but its the most accurate load you can log with tephra

 

personally I don't like 1byte, it may be more accurate but it causes gaps in the data and odd values that are impossible. 2byte ftw

 

What kind of gaps? I've never had that happen to me.

 

Is there anyone who can help me? I need a rom for my eclipse 2003 GS AT??

 

can someone point me in the right direction ...I want to install an omni 4 bar so i can log boost. I know that there is xml i need to add into my rom and i know the thread that has that xml. my question is... since i am using a v7 rom what xml should i be using and is there a thread that has this information in it? any help getting this figured out would be much appreciated.

 

bump

 

You need to add the relevant XML data for the OMNI to the v7 xml.

Without trying to sound like an ****, you probably could have found everything you need to know in this thread after a brief search:

https://www.evolutionm.net/forums/ec...t-control.html

 

didn't think to look in that thread because i am not looking to convert to ecu boost control. but thanks for you help. I know i need the relevant xml for my v7 rom. but the only xml i have found that seems relevant is the xml listed for a 03 evo rom. but i have a v7 rom so that is why i am trying to find out if the xml is different for that rom

 

https://www.evolutionm.net/forums/ec...evo-8-9-a.html this thread has the xml listed for an 03 evo rom..but i am using v79653X706. wondering if the xml in this thread is what i need to add to my rom?

 

i have the lc1 innovate wideband and on evoscan and access race tuner logs the afr without the first number , the numbre one is missing any help.

on the logworks program reads perfect

 

guys need advice, downloaded new version of evoscan 2.8 and it stopped reading DTC errors ! I connect it to the ECU (check is there, on the dashboard), but evoscan says no errors stored ! Any solutions what to do with this ?

 

Can someone please tell me how to log 2byte load with Mitsulogger v1.6 Beta 3. my ROM ID is 88590015. I finally got my AEM wideband to log properly but now i cant log any load. Im desperate please some one PM me or call me 845-821-3399. I need step-by-step instructions since im verrrry new at this. Thanks for the help guys.