27926

 

this thread was a great informative read

 

26694

 

Thank you, sir!

 

Thank you!

 

jcsbanks,

Would you be kind enough to find the proper address for the load limit removal code (<table name="Set to 9 to remove load limit" address="26592" type="1D" level="1" scaling="Hex16"/> )

for ROM 96530006?

 

It's on the previous page.

 

I need a vacation.

 

Had not bothered reading this thread before, now I see why it keeps popping up!
Great work jcs, just brilliant.

Now I need to go and find someone in Sydney who is maxing 380, hehe.

 

We need to remove two limits - one for load and one for the IPW calc. You can register higher load but it won't richen up the fuelling at the same fuel map entry, so this needs to be fixed as well. I haven't published the IPW calc one yet except for Mellon, but he was a bit busy to test. Let me know who wants to test first...

 

Ted B's probably the best candidate besides Mellon. I haven't done anything to go past 362 2byte load yet.

I'm still tempted to add meth/water to E85 and let Bryan @ GST have at it, but I'll need to buy/install the Omnipower 4 bar MAP sensor first since we maxed it out on the E85 tune.

 

I forgot about this...I'm going to be installing a fuel rail soon and that would be the perfect opportunity to re-tune it. I don't recall if you sent that in a PM or if it's in here though.

 

See post #117 on page 8.

 

ok thanks, I'll add this to my to do list

 

Hopefully you'll find it helps you hit your mapped AFR easily without having to richen it as you go towards 400, 420, 440 load as you continue your Saturn V project