Anyone know where I can get a map sensor connector retainer clip?

I was putting on my JDM map sensor, had the little retainer clip on my valve cover.. the phone rang something dropped.. I was still at work and had to go pick up my kids and didnt have time to search everywhere for the clip. It might be in my undertray or maybe not.

 

update: I bent and cut a standard sized paperclip and that worked. it doesnt hold it as good as the original retainer but I doubt it will come off.

 

At first I though this was about exceeding 33.28psi. That clip is very close to an injector clip and you can get those almost anywhere.

 

Thanks John, I'll see if I can find one. I would have posted this somewhere else but I would have to explain what it was to everyone in general help where as in here anyone who has the JDM map sensor will pretty much know what I was talking about.

 

yea im missing a clip from the injectors. droped one and never found it again

 

Yeah when I was installing mine I was lucky a guy who played with those type of clips before was around he held it while I switched them

 

I just lost my clip :-(

 

i have seen someone make one out of a paperclip. I think the same place i read that they did that because you cant buy them. I would pm some vendors and see if they have any laying around.

 

i dont even have the whole plug to connect it to the map sensor,any ideal where i can get one guy?i try the dealer they only sell them as the whole harness,

 

i had the 5 bar map sensor upgrade for ems,than the shop cut it off for clean installation,now i dont even known if i can find one