Notices

The DTC Disable thread (P1235, P1241, P1238, etc)

Thread Tools
 
Search this Thread
 
Old Oct 2, 2015 | 03:28 AM
  #541  
lexa609's Avatar
Newbie
 
Joined: Apr 2015
Posts: 52
Likes: 1
From: Rus
Originally Posted by rpizarro
hi, help please
i tuned for first time a lancer Gt Cvt ecu id 52180008 with turbo kit of evo x and i have the error p1235 and p1241
Please help for eraser this DTC
And the other problem is my definition pass to load of 100 to 260, and between no have data for change.

this car is good run but with the error is limp mode
please
my email is rogerpizarro@gmail.com
Maybe you need to calibrate the MAF?
ECU from Evo installed ?
Reply
Old Oct 1, 2016 | 01:59 PM
  #542  
lexa609's Avatar
Newbie
 
Joined: Apr 2015
Posts: 52
Likes: 1
From: Rus
How to disable EGR valve ? error p0489

Lancer X GTS
I can get it just rename it in hex address 939df

romid 51420011

Last edited by lexa609; Oct 1, 2016 at 02:43 PM.
Reply
Old Jun 22, 2017 | 01:35 PM
  #543  
framirezz1025's Avatar
Newbie
 
Joined: Jun 2017
Posts: 3
Likes: 0
From: new york
Hey has anyone come up with a way to disable P04443 as well as P2128 on 52680022. I've installed a evo x motor in a 2008 lancer gts using 08 evo x ecu. these are the only 2 codes I have. I've switched pedal sensors out for known working one and verified all wiring to ecu is correct.
Reply
Old Jun 27, 2017 | 11:19 AM
  #544  
dan-lincs's Avatar
Newbie
 
Joined: May 2016
Posts: 29
Likes: 1
From: UK
Does anyone have a P0420 disable on rom ID 53610010 ?
Reply
Old Jul 4, 2017 | 12:39 PM
  #545  
lexa609's Avatar
Newbie
 
Joined: Apr 2015
Posts: 52
Likes: 1
From: Rus
Originally Posted by dan-lincs
Does anyone have a P0420 disable on rom ID 53610010 ?
ECU option set2 ---> bit.l rear O2 ----> 0
Reply
Old Jul 4, 2017 | 01:33 PM
  #546  
dan-lincs's Avatar
Newbie
 
Joined: May 2016
Posts: 29
Likes: 1
From: UK
Oh wow really that easy.

I will give it a try, thanks.
Reply
Old Jul 5, 2017 | 06:00 AM
  #547  
richardjh's Avatar
Evolved Member
 
Joined: Oct 2010
Posts: 2,447
Likes: 14
From: Australia
Originally Posted by lexa609
ECU option set2 ---> bit.l rear O2 ----> 0
Originally Posted by dan-lincs
Oh wow really that easy.

I will give it a try, thanks.
I seem to recall this will disable the rear o2 sensor's heater circuit as well... which apparently isn't healthy for the sensor if it's still fitted.

If your sensor is still present and you care about it, plan B would probably be to try one of those o2 "extender" fittings, which move the sensor back and away from the airflow.

If any of this is wide of the mark, folks, please feel free to offer corrections!

Rich
Reply
Old Jul 6, 2017 | 08:50 PM
  #548  
lexa609's Avatar
Newbie
 
Joined: Apr 2015
Posts: 52
Likes: 1
From: Rus
Should be completely off the oxygen sensor even if it is on the car.

Although I'm not sure you need to try.
Reply
Old Jan 12, 2018 | 04:21 AM
  #549  
icemanneo's Avatar
Newbie
 
Joined: Jan 2018
Posts: 1
Likes: 0
From: manila
greetings masters,

i just wanted to ask for your help to disable my current dtc. i flashed an Evo x Rom on my stock Turbo Lancer 2.0L 4B11. my car starts and runs just needs a tuning but my concern now is maybe you can help me disables these dtc that pops up. i've been reading for weeks now about disabling these dtc.
i'm willing to donate anything...
i've been messaging master tephra about my concerns but his inbox is full.

ID: 52680075
DTC to disable:
1. P0098
2. P0183
3. P0365
4. P0441
5. P0106
6. P0452
7. P0243
8. P0069

i hope you can help me guys

cheers,
Reply
Old Jan 13, 2018 | 10:27 PM
  #550  
lexa609's Avatar
Newbie
 
Joined: Apr 2015
Posts: 52
Likes: 1
From: Rus
For the turbo Lancer need to use the ECU from Evo (firmware from evo )


Little information about your car.
Reply
Old Mar 24, 2018 | 11:18 PM
  #551  
jonmbaez's Avatar
Newbie
 
Joined: Aug 2015
Posts: 4
Likes: 0
From: new jersey
bumping this post.

would a RA ecu work? or has o be strictly EVO X?

having a similar situation here
Reply
Old Oct 6, 2018 | 01:17 PM
  #552  
psfp's Avatar
Newbie
 
Joined: Jan 2012
Posts: 87
Likes: 10
From: Brazil
Hi guys,
Any love for P0365 code? It's a NA Lancer with Evo ROM AND ECU, but this car doesn't have MIVEC on exhaust camshaft (no solenoid, no cam phase sensor).
Reply
Old Dec 24, 2019 | 06:50 PM
  #553  
Ian|Ky's Avatar
Newbie
 
Joined: Apr 2014
Posts: 5
Likes: 0
From: Louisville, ky
Bumping so I can look at this tomorrow. CEL is driving me nuts.
Reply
Old May 13, 2020 | 08:03 AM
  #554  
Tristanlim93's Avatar
Newbie
 
Joined: May 2020
Posts: 2
Likes: 0
From: Kuala Lumpur
Guys, I have this 52180008 Lancer 2009 2.0 NA rom would like to disable P1241 torque monitor, anyone could help?
Reply
Old Jun 30, 2020 | 09:25 AM
  #555  
10isace's Avatar
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (12)
 
Joined: Nov 2008
Posts: 1,058
Likes: 16
From: East of the Rockies
Can't seem to find the right address for 5360 USDM 09 RA for P0140. Anyone have the right address? I have 539c0 which shows no match in ECUFlash. Thanks!
Reply



All times are GMT -7. The time now is 12:02 PM.