I just realized that if you used 503ae and it had 0001 in it, the 01 part is 503af. So you probably already tried my address.

 

I am having trouble understanding how to set bit 01 to 0 in the ECU option set #2, sorry i am newbie and i am trying to learn correctly, can anybody explain it further, thanks!

 

Try [ or ] key

 

Do i just select the ECU option set #2 and then try those keys until i see the 01 turn to 0

 

ECU option set #2, bit.1.

yes, pressing [ will decrease the value, pressing ] will increase the value. a bit only holds 0 or 1 so pressing either key will suffice until it displays 0.

 

is anyone able to verify an address for me or tell me how i can try? i hooked the 5v out from my wideband up to my ecu to log via evoscan now i get the SES light for P0139 despite having changed this to 0x0:

<table name="DTC P0139 Disable 0x1 -> 0x0 Oxygen Sensor Circuit Slow Response (Bank1, Sensor2)" category="Misc" address="503b8" type="1D" scaling="Hex8"/>

note: '12 gsr, rom id 5801005, no rear o2 with bit.1 disabled.

 

That address is correct, but that may not stop you from getting CEL's from hooking in the wideband's output. I don't know if anyone has done that yet with the newer roms.

 

oh that sucks. i'll just unhook it when i'm not logging then. i really hate seeing a check engine light.

either way i sent you an email if you have time to look it over.

 

This was fixed with 503bb. We'll let Mo drive around a little longer to make sure.


(Edit: Thanks to Rich! )

 

it's been a week and 200 miles later. looks like 503bb did the trick for 58010005.


here is the new code for DTC P0139 as well as DTC P0140 for 58010005.
* note, i no longer have DTC P0140 disabled due to installing the wideband. i went from no activity (P0140) to having irregular response with the wideband (P0139).

golden, i will send you a new definitions file later today. it will have these updates and PSI based boost control added.

thanks to rich indeed.

 

Nice display.

Sheesh, everyone has cooler tech than me...

Rich

 

Haha, that's my android tablet running an app called torque pro. Uses a obd2 bluetooth adapter.

I'll post a pic of the other page with the gauges.
found a pic when it was installed in my old car. pre evo, now i love that it's my boost gauge.
http://www.flickr.com/photos/1299359...7627728933809/

 

That's fantastic. Love the night-time shot. Awesome...

Rich

 

Can we disable p0300 and p0219?

 

EDIT: i just noticed your signature. you have a lot of work done so this may not even get close to applying to your situation but:

p0300 is multiple misfire. did you do anything to change the ignition system?
p0219 is engine over speed. was there a mis shift/over rev?

the ecu presenting both of those codes in combination would lead me to believe the motor over-revved (p0219) and there could be valve damage (presented as misfiring in p0300).

https://www.evolutionm.net/forums/ev...de-help-3.html