Notices
ECU Flash

TephraMod V7

Thread Tools
 
Search this Thread
 
Old Aug 24, 2012 | 09:33 AM
  #2701  
luapnrets's Avatar
Newbie
 
Joined: Aug 2009
Posts: 19
Likes: 0
From: Grand Junction, CO
ECUflash = Free
Mitsulogger = $20
Tephramod V7 xml = $20 donation
Wideband O2 = $200
Tatrix cable = $120
Learning how to tune yourself = Priceless
Reply
Old Aug 27, 2012 | 02:45 PM
  #2702  
ecktt's Avatar
Evolving Member
 
Joined: Mar 2009
Posts: 256
Likes: 2
From: Trinidad
Originally Posted by luapnrets
Tephramod V7 xml = $20 donation
Man I'd feel ashamed to afford an Evolution and only give Tephra $20 for all his hard work to turn our ECUs into a something awesome.
Reply
Old Aug 28, 2012 | 02:53 PM
  #2703  
luapnrets's Avatar
Newbie
 
Joined: Aug 2009
Posts: 19
Likes: 0
From: Grand Junction, CO
Originally Posted by ecktt
Man I'd feel ashamed to afford an Evolution and only give Tephra $20 for all his hard work to turn our ECUs into a something awesome.
I figure $20 is better than nothing since the 88590715 rom is free. Maybe if I didn't spend all of my money on a car and insurence I could afford more than a $20 donation.
Reply
Old Aug 28, 2012 | 04:39 PM
  #2704  
mdost03's Avatar
Evolving Member
 
Joined: Jul 2012
Posts: 107
Likes: 0
From: Minnesota
Hey guys, looking for opinions here. New to evo's and ecuflash.

I have 2003 USDM Evo 8 and was wondering which rom is recommended to use: 96530706 or 94170715? I am pretty sure I tried 94170715 last week and had a little drivability issues (stock rom, no additional mods). I thought all the tables were supposed to be matched up to stock, but with the bigger maps, so I was confused on why drivability was not the same. Would I have better luck with 96530706 or should it be the same? I am currently on v5.10 and drivability is pretty much exactly like stock again, but would like to use the latest version if possible. Any help is appreciated! Thanks in advance!
Reply
Old Aug 28, 2012 | 06:24 PM
  #2705  
07EvoIX's Avatar
Evolving Member
 
Joined: Oct 2010
Posts: 175
Likes: 1
From: Sydney
did you copy all your maps over to the V7 one? i dont think the V7 roms are very correct and need some massaging to get going properly.

cheers
Reply
Old Aug 28, 2012 | 06:29 PM
  #2706  
mdost03's Avatar
Evolving Member
 
Joined: Jul 2012
Posts: 107
Likes: 0
From: Minnesota
Originally Posted by 07EvoIX
did you copy all your maps over to the V7 one? i dont think the V7 roms are very correct and need some massaging to get going properly.

cheers
I didn't copy maps over as I compared the ones that were in the v7 rom to my stock and they seemed to match up (besides being the larger maps. Do you recommend still using the BigMap translator with my stock rom tables and copy/paste to the v7 rom?
Reply
Old Aug 28, 2012 | 08:36 PM
  #2707  
07EvoIX's Avatar
Evolving Member
 
Joined: Oct 2010
Posts: 175
Likes: 1
From: Sydney
it is not just the fuel and timing maps you need to check. it is pretty much every map/table.

cheers
Reply
Old Aug 31, 2012 | 12:28 AM
  #2708  
dawnduran's Avatar
Newbie
 
Joined: Jan 2007
Posts: 88
Likes: 0
From: Germany
there are many changes in fuel maps like injector settings etc.
somebody here, which could post a stock VIII-rom with v7-mod, especially start-maps
Reply
Old Aug 31, 2012 | 02:46 PM
  #2709  
charlesman's Avatar
Newbie
 
Joined: Sep 2011
Posts: 1
Likes: 0
From: Puerto Rico
TephraMod V7

H. Does this mod includes speed density settings for evo 8? If it does, which rom # is correct for this vehicle.

Charles
Reply
Old Aug 31, 2012 | 04:13 PM
  #2710  
07EvoIX's Avatar
Evolving Member
 
Joined: Oct 2010
Posts: 175
Likes: 1
From: Sydney
the first page tells you what each ROM number is for.

cheers
Reply
Old Sep 1, 2012 | 09:42 PM
  #2711  
Grimgrak's Avatar
Evolved Member
iTrader: (3)
 
Joined: Dec 2011
Posts: 1,622
Likes: 17
From: Panama
Is it at all possible for the tephra to trigger external outputs as alarms? IE. during boost if my a/f goes 12:1 I want it to trigger my horn?
Reply
Old Sep 5, 2012 | 02:02 PM
  #2712  
yellow303EVO's Avatar
Newbie
iTrader: (4)
 
Joined: Apr 2010
Posts: 25
Likes: 0
From: colorado
what iat are you guys running on the SD, what wires are you running it to on the maf plug?
Reply
Old Sep 5, 2012 | 07:59 PM
  #2713  
steven121's Avatar
Evolved Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (27)
 
Joined: Oct 2009
Posts: 2,787
Likes: 12
From: TX
Has anyone noticed less hp or a slower Evo with the Ron id
94170715? It seems like my car has gotten slower all I changed was the immobilizer
Reply
Old Sep 6, 2012 | 12:10 AM
  #2714  
CDrinkH2O's Avatar
EvoM Guru
15 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Nov 2006
Posts: 1,147
Likes: 162
From: San Francisco
Originally Posted by Grimgrak
Is it at all possible for the tephra to trigger external outputs as alarms? IE. during boost if my a/f goes 12:1 I want it to trigger my horn?
Check out the alarm function already built in to Evoscan. I use it to make a horn sound on my PC when AFR goes lean over a load of 200.
Reply
Old Sep 10, 2012 | 08:22 PM
  #2715  
browningderek's Avatar
Evolved Member
iTrader: (7)
 
Joined: Feb 2007
Posts: 573
Likes: 0
From: MoTown,GA
I about to try my first teprha v7 setup but im confused on one thing. Under "stock replacment maps" i see the stock maps are made into big maps, i thought i read somewhere that those maps do nothing? But i dont see any other fuel map to change.
Reply



All times are GMT -7. The time now is 11:56 AM.