EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
ECU Flash

TephraMod V7

Thread Tools
 
Search this Thread
 
Old Jul 24, 2010 | 10:47 PM
Share
  #1951  
teribble's Avatar
teribble
Evolving Member
iTrader: (31)
 
Joined: Sep 2006
Posts: 299
Likes: 0
From: Las Vegas
Originally Posted by phenem

EvoScan XML Data to add:
Code:
<DataListItem DataLog="Y" Color="" Display="Gear" LogReference="Gear" RequestID="40" Eval="x" Unit="units" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="300" ChartMin="0" ChartMax="300" ScalingFactor="1" Notes="" Priority="5" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="RPM_SPEED_RATIO_AVERAGE" LogReference="RPM_SPEED_RATIO_AVERAGE" RequestID="42" RequestID2="43" Eval="x/36.37" Unit="rpm/kph" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="300" ChartMin="0" ChartMax="300" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="Airflow Rate gm/s" LogReference="gmas" RequestID="00" RequestID2="01" Eval="x*0.0236" Unit="gm/s" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="10000" ChartMin="0" ChartMax="10000" ScalingFactor="1" Notes="" Priority="4" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="Load 1Byte" LogReference="Load" RequestID="41" Eval="1.3*x" Unit="load" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="300" ChartMin="0" ChartMax="300" ScalingFactor="1" Notes="Displays state of the throttle. High voltage or % value means a more open throttle. When logging engine activity (especially on the dyno), it is useful to log throttle position. This makes it easy to see when a power run begins and ends i.e. when the driver's foot is depressing the accelerator fully. Some mitsubishis show up to 20% when your foot is off the accelerator, and will show a max of 90-99% when your foot is fully applied, this is normal.&#xD;&#xA;" Priority="1" Visible="False" />
<DataListItem DataLog="Y" Color="" Display="Airflow 2Byte" LogReference="AirFlow2Byte" RequestID="02" RequestID2="03" Eval="6.29*x/64" Unit="Hz" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="3000" ChartMin="0" ChartMax="2500" ScalingFactor="0.1" Notes="" Priority="4" Visible="False" />
<DataListItem DataLog="N" Color="" Display="Airflow Rate lb/min" LogReference="lbamin" RequestID="00" RequestID2="01" Eval="0.00312*x" Unit="lb/min" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="10000" ChartMin="0" ChartMax="10000" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="N" Color="" Display="Mileage Gasoline" LogReference="mpg" RequestID="CALC" Eval="5.9*[Speed]*[AFRMAP]/[lbamin]" Unit="mpg" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="10000" ChartMin="0" ChartMax="10000" ScalingFactor="1" Notes="" Priority="1" Visible="False" />
<DataListItem DataLog="N" Color="" Display="Mileage E85" LogReference="mpge" RequestID="CALC" Eval="4.18*[Speed]*[AFRMAP]/[lbamin]" Unit="mpg" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="10000" ChartMin="0" ChartMax="10000" ScalingFactor="1" Notes="" Priority="1" Visible="False" />Omni 4-Bar MAP
<DataListItem DataLog="Y" Color="" Display="OMNI MAP" LogReference="OMNIMAP" RequestID="38" Eval="0.2369*x-14.7" Unit="psig" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="-15" GaugeMax="42" ChartMin="-15" ChartMax="42" ScalingFactor="1" Notes=""/>
Where do i post this in the Data XML? I tried to post it under mode 2 in evoscan v2.5 2and it said something about already having a gear reference.
Reply
0
Old Jul 25, 2010 | 02:01 AM
Share
  #1952  
AlexEvo6's Avatar
AlexEvo6
Newbie
iTrader: (1)
 
Joined: Feb 2009
Posts: 58
Likes: 0
From: France
you should delete or modify the initial request.
You can tweak the xml or edit the request in evoscan with ctrl-e
Reply
0
Old Jul 25, 2010 | 07:45 AM
Share
  #1953  
teribble's Avatar
teribble
Evolving Member
iTrader: (31)
 
Joined: Sep 2006
Posts: 299
Likes: 0
From: Las Vegas
I found it. It looks like you need to paste it in the data.xml under obdII and it works fine. It was late last night and i wasn't looking to hard!
Reply
0
Old Jul 27, 2010 | 07:55 PM
Share
  #1954  
evane's Avatar
evane
Evolved Member
iTrader: (13)
 
Joined: Apr 2008
Posts: 807
Likes: 0
From: Lincoln, Nebraska
how do i disable the P0141 test? i am getting this CEL and need to know how to get rid of it! im sick of the SES light =(....i disabled the P0401 code by changing the periphery...
Reply
0
Old Aug 1, 2010 | 05:15 PM
Share
  #1955  
wizzo 8's Avatar
wizzo 8
Evolved Member
20 Year Member
Photogenic
Liked
Loved
iTrader: (35)
 
Joined: Mar 2005
Posts: 3,836
Likes: 14
From: Chicago suburbs
Subscribed
Reply
0
Old Aug 1, 2010 | 07:11 PM
Share
  #1956  
drifterific's Avatar
drifterific
Evolving Member
15 Year Member
iTrader: (10)
 
Joined: Mar 2010
Posts: 239
Likes: 1
From: wa state
Is there any definitive way of getting the EvoScan Map Tracer feature working with 96530706 v7? I had it working on my stock rom with 2 byte load but after editing the EvoScan Xml with the mods listed on the second post I got 2 errors from

<DataListItem DataLog="Y" Color="" Display="Gear" LogReference="Gear" RequestID="40" Eval="x" Unit="units" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="300" ChartMin="0" ChartMax="300" ScalingFactor="1" Notes="" Priority="5" Visible="False" />

<DataListItem DataLog="Y" Color="" Display="Airflow Rate gm/s" LogReference="gmas" RequestID="00" RequestID2="01" Eval="x*0.0236" Unit="gm/s" MetricEval="" MetricUnit="" ResponseBytes="1" GaugeMin="0" GaugeMax="10000" ChartMin="0" ChartMax="10000" ScalingFactor="1" Notes="" Priority="4" Visible="False" />


So I pulled them out of the Xml and now EvoScan loads properly but when logging just 1byte load Maptracer shows nothing at all. Any tips?

I do have a omni 4 bar mapsensor and there was nowhere in 96530706 to put the scaling for the map sensor
Reply
0
Old Aug 2, 2010 | 12:01 AM
Share
  #1957  
STi*guy.kiev's Avatar
STi*guy.kiev
Evolving Member
 
Joined: Nov 2006
Posts: 196
Likes: 0
From: NY
Evo 7 jdm/arab
hey can I tune with SD in the 90550001 ROM v5.10?
when will the V7 be working for the 90550001?
Reply
0
Old Aug 6, 2010 | 01:20 AM
Share
  #1958  
STi*guy.kiev's Avatar
STi*guy.kiev
Evolving Member
 
Joined: Nov 2006
Posts: 196
Likes: 0
From: NY
thephra, anything?
Reply
0
Old Aug 6, 2010 | 06:41 AM
Share
  #1959  
Icem@n's Avatar
Icem@n
Evolving Member
iTrader: (1)
 
Joined: Mar 2009
Posts: 112
Likes: 0
From: St. George's, Grenada
Originally Posted by STi*guy.kiev
thephra, anything?
Waiting patiently also too man.
Reply
0
Old Aug 7, 2010 | 12:31 AM
Share
  #1960  
VGergo's Avatar
VGergo
Evolved Member
20 Year Member
iTrader: (3)
 
Joined: Nov 2005
Posts: 566
Likes: 1
From: Hungary
Hello

If you diseable the high octane ign maps lookup in the Periphery 0 bit 7 than you have tune the low oct ign map and high oct fuel map and the Ecu can not lowering timing any degrees on knock ? Or is there anyway to turn off the knock sensor in the V7 9653 ?
Reply
0
Old Aug 7, 2010 | 11:33 PM
Share
  #1961  
Michal_6's Avatar
Michal_6
Newbie
 
Joined: Jul 2010
Posts: 2
Likes: 0
From: Warsaw
Hi
Nobe here,
I've got E8 EDM ECU with ROM 97250001, with switched off EGR and Rear O2 sensor, immo off implemented in E6 TME with E8 engine and E6 original haerness via patch harness.
The question is which ROM I can use with this ECU to start with TephraMOD ?
My 97250001 rom was downloaded from Ecuflash page and E5/E6 to E7/E8 ECU swap topics

Michal
Reply
0
Old Aug 8, 2010 | 04:02 AM
Share
  #1962  
STi*guy.kiev's Avatar
STi*guy.kiev
Evolving Member
 
Joined: Nov 2006
Posts: 196
Likes: 0
From: NY
tephra please confirm whether If I can use either 5.10 or V7 to tune my evo 7 rs2 with speed density.
Reply
0
Old Aug 8, 2010 | 05:01 PM
Share
  #1963  
tephra's Avatar
tephra
Thread Starter
EvoM Guru
15 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 9,486
Likes: 67
From: Melbourne, Australia
probably use V7, but use one of the preset SD ROM's...
Reply
0
Old Aug 9, 2010 | 06:09 PM
Share
  #1964  
ecktt's Avatar
ecktt
Evolving Member
 
Joined: Mar 2009
Posts: 256
Likes: 2
From: Trinidad
Originally Posted by tephra
probably use V7, but use one of the preset SD ROM's...
There is a V7 for E7?! Can anyone point me to it?
Reply
0
Old Aug 10, 2010 | 01:37 PM
Share
  #1965  
burgers22's Avatar
burgers22
Evolved Member
 
Joined: Jan 2006
Posts: 953
Likes: 2
From: Oxfordshire
Originally Posted by STi*guy.kiev
tephra please confirm whether If I can use either 5.10 or V7 to tune my evo 7 rs2 with speed density.
There are a few guys in the UK running SD on the 9055 ROM, so you good to go. Contact cossie1 on here or at www.geekmapped.com

I'm waiting on the 9055 V7 as well, I've gone back to V5.10 as my car ran like a bag of spanners around town on the 96532706 V7, WOT and cruise was fine, but start and idle was nasty.
Reply
0



Advanced Search

All times are GMT -7. The time now is 06:57 PM.