TephraMod V7

Reply Subscribe

Thread Tools

Search this Thread

Aug 21, 2010 | 09:55 PM

#1996

Appauldd

Evolved Member

iTrader: (22)

Joined: Nov 2003

Posts: 2,408

Likes: 7

From: Northern KY near Cincy

Yeah, I read that previously, but no conclusion was ever made.

Aug 21, 2010 | 09:58 PM

#1997

Appauldd

Evolved Member

iTrader: (22)

Joined: Nov 2003

Posts: 2,408

Likes: 7

From: Northern KY near Cincy

Also, might re-scaling as we do change the point of crossover? Without the exact code and a table to track it, we don't know. There is more than just me out there that has this goofy cut out at low rpm when boost just starts to build.

Aug 22, 2010 | 08:59 AM

#1998

wreckleford

Evolved Member

iTrader: (2)

Joined: Jun 2003

Posts: 1,171

Likes: 11

From: Jamaica

You could just remove relay 3 and bridge the contacts to engage the high circuit at all times. Do it as a test to see if the switching is the source of your problem.

Aug 22, 2010 | 01:36 PM

#1999

Appauldd

Evolved Member

iTrader: (22)

Joined: Nov 2003

Posts: 2,408

Likes: 7

From: Northern KY near Cincy

The bridge was on the "to do list". I was hoping to get the proper table to adjust it all electronically though.

Aug 23, 2010 | 12:34 AM

#2000

Mr.Nik

Newbie

Joined: Feb 2010

Posts: 15

Likes: 0

From: Russia

I have firmware 94170008, what firmware I use 96530706 or 94170715?
Thank you

Aug 23, 2010 | 01:10 AM

#2001

Boosted Tuning

Former Sponsor

iTrader: (12)

Joined: Jun 2005

Posts: 2,383

Likes: 8

From: Chico, CA (Nor-Cal)

Quote:

Originally Posted by mr.nik

i have firmware 94170008, what firmware i use 96530706 or 94170715?
Thank you

94170715

Aug 25, 2010 | 12:56 PM

#2002

Dragracer187

Evolved Member

iTrader: (1)

Joined: Jul 2007

Posts: 562

Likes: 0

From: The Dragstrip

Is there a metric version of V7?

Aug 25, 2010 | 01:05 PM

#2003

evo_gerard

Evolving Member

iTrader: (1)

Joined: Jul 2007

Posts: 149

Likes: 0

From: Trinidad & Tobago

90550001 please would really like big maps!

Aug 28, 2010 | 03:07 AM

#2004

VGergo

Evolved Member

iTrader: (3)

Joined: Nov 2005

Posts: 566

Likes: 1

From: Hungary

Option 4 96530706 (v7 + Mods) rom the base MAP sensor scaling is for Omni4bar ?

How I checked the xml all of the boost tables scaling useing the Omni4barMap.

Aug 28, 2010 | 11:46 AM

#2005

Shy

Newbie

Joined: Jun 2009

Posts: 32

Likes: 0

From: Abu Dhabi

Hi guys!,

Thanks Tephra for all your great stuff enhancing the evo community worldwide

I wanted to ask about the NLTS for my evo 9 (Rom 88580015). Is it available? how can i install it? etc

On another note, I heard from everyone its impossible to activate the antilag system on stock ecu.....is that true? anyway around that??

Have a nice day!

Cheers!

Aug 29, 2010 | 04:23 PM

#2006

Icem@n

Evolving Member

iTrader: (1)

Joined: Mar 2009

Posts: 112

Likes: 0

From: St. George's, Grenada

Quote:

Originally Posted by evo_gerard

90550001 please would really like big maps!

X2. Anxiously awaiting also

Aug 30, 2010 | 01:40 AM

#2007

project_skyline

Evolved Member

iTrader: (30)

Joined: Jun 2007

Posts: 2,532

Likes: 1

From: Colorado

Hey tephra!

What rom would work for a JDM Evo 7 with current rom 98640014?

Aug 30, 2010 | 02:41 AM

#2008

burgers22

Evolved Member

Joined: Jan 2006

Posts: 953

Likes: 2

From: Oxfordshire

Quote:

Originally Posted by project_skyline

Hey tephra!

What rom would work for a JDM Evo 7 with current rom 98640014?

90550001 is what you are after. I've been running mine on the version 5.10 for sometime, I did get 96530706 to run with no CELs, and though on boost was fine, idle and fuel consumption were always an issue. Tephra did indicate he had a 90550001 V7 nearly finished, but he's a busy guy, so I don't think it's been tested fully yet.

Aug 31, 2010 | 12:17 AM

#2009

project_skyline

Evolved Member

iTrader: (30)

Joined: Jun 2007

Posts: 2,532

Likes: 1

From: Colorado

Quote:

Originally Posted by burgers22

Thanks for giving me that update.

Tephra if you need a tester I got someone who can do some testing for that rom.

Aug 31, 2010 | 01:47 PM

#2010

mountainturbo

Newbie

iTrader: (9)

Joined: Jan 2007

Posts: 85

Likes: 0

From: WVC, UT

Quote:

Originally Posted by Monochrome

Might I suggest adding the rear O2 sensor heater disable to this patch as well?

Code:

<table name="Rear O2 Heater Patch" category="Mods" address="2c62a" type="1D" scaling="Hex16"/>

Open up the ROM, navigate to the "Mods" section, change "Rear O2 Heater Patch" from "4A0B" to "0009"

My rear O2 has been replaced with the wideband.

This might also work but I need to confirm the address!

Code:

	<table name="Heater CEL" category="Rear O2" address="2c61e" type="2D" level="2" scaling="blobbits">
		<table name="Bit values" type="Static Y Axis" flipy="true" elements="8">
			<data>N/A</data>
			<data>N/A</data>
			<data>N/A</data>
			<data>N/A</data>
			<data>Rear O2 Heater CEL Enable</data>
			<data>N/A</data>
			<data>N/A</data>
			<data>N/A</data>
		</table>
	</table>

Does anyone know if this code works with Option 4 96530706 (v7 + Mods) ? I replaced my stock 05 rom, and although I disabled the rear 02 sensor (I have a wideband installed) I get a p0125 error, and I think it's from the rear heater circuit not functioning. I believe this code will fix it, but I don't know if it will work with that rom.

:edit:

Nevermind, I'm an idiot, this code is already in the rom. Sooo... anyone know why I would keep getting a P0125 CEL with the new rom? :help:

Last edited by mountainturbo; Sep 1, 2010 at 10:55 AM. Reason: :P