SpoolinUp SD plug-n-play harness development
Evolving Member
Joined: Nov 2006
Posts: 180
Likes: 0
From: Mechanicsville, MD
Back from the grave with good news....FINALLY.
Custom molded (rejected the first mold, this is the second mold), PA66 plastic, tin coated terminals (not pictured). Should have units ready to ship within 1.5-2 weeks.
Got tons of people on an "unofficial" wait list, but now that I actually have some good news I started a wait list. Go to http://spoolinup.com/sd.html and fill the simple form out. You will be notified the second they are available.
The harness will be $109 alone and $119 with IAT. The connector will be available separate too for the DIYers for roughly $20, custom molds aren't cheap! If anyone wants to start a group buy I'll do 15 harnesses for $89.99 e/a.
I'm also carrying ECU Pins for 8's and 9's!
Time to get ready for snowboarding!
Edit: How can I make this work with a MAP for the EDM/JDM guys?
Custom molded (rejected the first mold, this is the second mold), PA66 plastic, tin coated terminals (not pictured). Should have units ready to ship within 1.5-2 weeks.
Got tons of people on an "unofficial" wait list, but now that I actually have some good news I started a wait list. Go to http://spoolinup.com/sd.html and fill the simple form out. You will be notified the second they are available.
The harness will be $109 alone and $119 with IAT. The connector will be available separate too for the DIYers for roughly $20, custom molds aren't cheap! If anyone wants to start a group buy I'll do 15 harnesses for $89.99 e/a.
I'm also carrying ECU Pins for 8's and 9's!
Time to get ready for snowboarding!
Edit: How can I make this work with a MAP for the EDM/JDM guys?
Also, does the IAT come with a bung?
No bung, but yeah $99 w/ IAT.....let me go look for bungs.
Let me get this straight,
I'm currently getting my car retuned for speed density but I do not have the IAT sensor plugged into my UICP, I would just need this harness to plug it in the Iat and Maf plug and it should be good to go? Instead of having to rewire it into the fuel temp sensor or the maf plug?
I currently have a evo 9 if that makes a difference?
I'm currently getting my car retuned for speed density but I do not have the IAT sensor plugged into my UICP, I would just need this harness to plug it in the Iat and Maf plug and it should be good to go? Instead of having to rewire it into the fuel temp sensor or the maf plug?
I currently have a evo 9 if that makes a difference?
Cool, got bungs on the way. $6 for alum, $7 for stainless.
Yeah, it's plug n play for the IAT, no rewiring necessary. Just gotta get that IAT installed in the manifold or intercooler pipe!
Let me get this straight,
I'm currently getting my car retuned for speed density but I do not have the IAT sensor plugged into my UICP, I would just need this harness to plug it in the Iat and Maf plug and it should be good to go? Instead of having to rewire it into the fuel temp sensor or the maf plug?
I currently have a evo 9 if that makes a difference?
I'm currently getting my car retuned for speed density but I do not have the IAT sensor plugged into my UICP, I would just need this harness to plug it in the Iat and Maf plug and it should be good to go? Instead of having to rewire it into the fuel temp sensor or the maf plug?
I currently have a evo 9 if that makes a difference?
These are back in stock now!
Too quick. Guess my "day off" will consist of making SD harnesses.
Im getting p0113, Intake Air Temperature Circuit High Input. If I take off the sd harness and plug in my maf it goes away. Anyone else have this problem? Idk if its related but I only log 256deg iat in evoscan, could the gm iat sensor be bad?
That CEL is from the IAT in the OEM MAF and obviously it doesn't see that sensor when you take the MAF off so you have to turn the CEL off.
Im using a v7 rom, which is already patched for SD, im using the spoolinup PnP harness so I dont need to wire anything, and I already added the data to evoscan. Whats the link for
