New 3D VE Maps SD Rom
Jan 31, 2011, 12:19 AM
#46
Roadspike,
Is this a combination of both the MAPVE and RPM VE table or just a 3D RPMVE table (basically)?
The reason I ask is the MAPVE table is a quick global adjustment and is handy for part changes retunign, where a 3D RPMVE table is very helpful for driving and fine tuning but would be slower to setup if it were the only table.
This might only affect me since I dont use a 1:1 ratio in the MAPVE table generally. If the Load point adjusts off a preset, then altering that would alter the ratio I suppose. Nice work though sir, looks very similar to the DSMlink V3 table.
aaron
Is this a combination of both the MAPVE and RPM VE table or just a 3D RPMVE table (basically)?
The reason I ask is the MAPVE table is a quick global adjustment and is handy for part changes retunign, where a 3D RPMVE table is very helpful for driving and fine tuning but would be slower to setup if it were the only table.
This might only affect me since I dont use a 1:1 ratio in the MAPVE table generally. If the Load point adjusts off a preset, then altering that would alter the ratio I suppose. Nice work though sir, looks very similar to the DSMlink V3 table.
aaron
I may have to make my own uncompensated load axis for the table if this simple workup doesn't suffice.
Jan 31, 2011, 12:21 AM
#47
Ok got it on the MAP scale thanks. I guess what I'm still not understanding is if you copy the 2D tables, MAP/Kpa and RPM/VE over into the new ROM how is the 3D table generated and what are the values currently in it? Do I need to calculate those from the data in my current tables?
The old 2d table isn't used but is shown for reference.
I'd say just start and go you should be able to see if the rom works first lol which is the goal here guys :P
Jan 31, 2011, 12:24 AM
#48
The v7 table btw was a fuel table which i copied into the "new ve" table to get started I wouldn't just copy that over. Also are you trying to program the rom from a current one you have? If you did you just overrode one of your fuel tables, can't rememeber which one it was.
HP G42
Jan 31, 2011, 10:18 AM
#54
Both of these where compressed with the windows 7 built in compression tool if they don't work i don't think i can help ya.
https://www.evolutionm.net/forums/9034219-post36.html
https://www.evolutionm.net/forums/9034219-post36.html