Can't start the engine with 96530006 replacement for 99270000
Thread Starter
Newbie
Joined: Feb 2011
Posts: 61
Likes: 1
From: Beirut,Lebanon
Btw i reinstalled the factory bcs and the ecu is still cutting the boost @ .6 bar...
Even if i re-flash the original 92700000 rom the boost cut is still there...
I also flashed the tephra v7 96530706 rom also without success
Why is the ecu doing that?
I've unmounted the Grimmspeed 3 port bcs and reinstalled the manual boost controller
Thread Starter
Newbie
Joined: Feb 2011
Posts: 61
Likes: 1
From: Beirut,Lebanon
Problem solved!
I disconnected the ecu completely and reconnected it and voila problem solved everything works great
Pfff what a bad dream
But when i reflash the 96530006 rom back the problem appears again, even if i reflash the stock rom back, so i'll have to disconnect the ecu...
I disconnected the ecu completely and reconnected it and voila problem solved everything works great
Pfff what a bad dream
But when i reflash the 96530006 rom back the problem appears again, even if i reflash the stock rom back, so i'll have to disconnect the ecu...
Thread
Thread Starter
Forum
Replies
Last Post
OG
ECU Flash
5
Jan 10, 2012 02:08 PM
