ive now got a 6 TME and also recieved my openport cable today so been having a bit of a play, managed to pull my rom from the ecu, but wanted to add in launch control, i have tried signing up to 'geekmapped.com' twice now to get the files and ask for help but i keep gettign rejected and no response from administrators, so any help is much appreciated

shane

 

27370001?

If so:

<table name="Stationary Rev Limit"address="10878" category="Limits" type="1D" scaling="RPMStatLimit"/>

 

ive adjusted the XML files, what needs changing on the ROM file?

 

That table I listed above.

OEM value is 7969 RPM.

Set it to what RPM you would like

 

Codes there but till doesn't work in my experience with both an Evo 5RS and 6GSR Bryan, the TME will be the same.
Required porting the rom to Ceddy which has coding to reference a speed below which the stationary limiter works.

Email me your rom at bjperry@gmail.com and i'll port it over and set it up for you.

 

Do you have a switch in clutch pedal?'

 

not sure will have to look,

and email sent!

 

clutch switch not needed with ceddy rom launch control , but if you want nlts aswell you will need it

 

^^^ On the money.

Email sent back Shane.

 

Sd coming soon too

 

thanks for the help guys!