how do i increase the boost load limit in my v7?

i recently went to v7 and was doing data logging, at 1 bar the car was fine but when i turned it to my set race boost 1.8 bar, the car went to 5500 rpm then BAM it seemed it hit a wall, this has happed to me before when i was on the v5 but cant remember what table i need to increase the boost cut...

 

it is the 'Boost Cut Load' table provided it is still named as such

cheers

 

well i found a boost limit table and its set at 225% , my car usually see's load of 300 or more, should i set all the load's in the table at above 300?

 

yes

 

I got a ? After you set up your boost load to 300 this allow you to run a 20 psi or more without issues?

 

what i usually do is set it to 319 then do a 3rd gear log look at the max load figure you hit then go back and set it 10-15 above max load

 

Got it. I have mine set over 300 but for some reason if the boost go over 19 or 20 the car start to acelarate with dificulty

 

sounds like it needs tuning badly