MAP EF4 e85 built 2L tuned by tscompusa/vr-speed
This factor alone is reason for me to get a built block (even if it is a used one) just for the added peace of mind.
Well, mine let go because my meth pump lost prime at WOT lol. Wasn't the blocks fault. Worst part is I had a brand new pump wired up ready to go in and I didn't get around to putting it in in time. Oh well lol.
I ran my fp black at 36-37 solid to redline and its still fine, but its a ball bearing garrett center section. i dont know how long a EF4 would hold up at 38psi at high RPM. the shaft speeds are probably well into the danger zone.
If you want to do that you have to use a 3 port. that is really putting a lot of stress on the turbo also. it might be ok with a 2.0L but if you have a larger displacement engine like a 2.3-2.4 its not really recommended for the long run of the turbo.
I ran my fp black at 36-37 solid to redline and its still fine, but its a ball bearing garrett center section. i dont know how long a EF4 would hold up at 38psi at high RPM. the shaft speeds are probably well into the danger zone.
I ran my fp black at 36-37 solid to redline and its still fine, but its a ball bearing garrett center section. i dont know how long a EF4 would hold up at 38psi at high RPM. the shaft speeds are probably well into the danger zone.
Well being it has been done many of times all you have to do is search. The op doesn't even own this car anymore and this thread is pretty old. I know Marlo made 650 whp in his on a 2.4 and I know the turbo will do more then that.
You didn't mean Murlo did you? LOL, sorry it was close to me so I wasn't sure haha. Maybe just another ef4 that made 650.
Yeah I did My mind went blank on the screen name hahahaha sorry about that. I know your car is no joke and all and I know your runnin what the guy is lookin for.







