STM's 770 HP Street RS.
No plot sorry. Its logged in AEM. It spikes at about 46 psi and falls off to 43 by 9k.
Not to bad for 46 psi. I'm sure it can take more but 800 was my goal when we strapped it down. No need to go further.
-Em
Not to bad for 46 psi. I'm sure it can take more but 800 was my goal when we strapped it down. No need to go further.
-Em
Evolved Member
iTrader: (5)
Joined: Mar 2009
Posts: 651
Likes: 5
From: With my admirers in the BACK ROOM!
I'm assuming the pulls are done in 4th gear? Beautiful car, btw.
Evolved Member
iTrader: (5)
Joined: Mar 2009
Posts: 651
Likes: 5
From: With my admirers in the BACK ROOM!
I know your're running buscher's double pumper with your feed and return lines... I'm making similar power with similar setup, except I'm running the doublepumper through the stock feed line and return line. I'm concerned about the car starving for fuel when i throw it back on the dyno in a few weeks. Do you think the feed line and return line you run enable's the system to supply a good deal more fuel?
Yea uPgrading the fuel and return lines will help pizzamans Evo was gasping for more fuel with stock lines with buschur dp. He upgraded the feed and return and had to adjust the richness out of the tune
I know your're running buscher's double pumper with your feed and return lines... I'm making similar power with similar setup, except I'm running the doublepumper through the stock feed line and return line. I'm concerned about the car starving for fuel when i throw it back on the dyno in a few weeks. Do you think the feed line and return line you run enable's the system to supply a good deal more fuel?
I love how this is hid DD and he says he is spiking 46 like ehh, you talk to the shops around here and you say 40 psi and they cringe and hide in the corner. That's extreme confidence in your work. First 8 sec evo with A/C?
Awesome Job Emery! I wish I had such a sweet beast.








