Hey guys just wanted to get some input and share my results. I have been playing around with E85 for about a year and these are my results so far. Mods are TBE w/o cat, Megan 02, S2 cams w/springs and Ti retainers, ETS LICP, RC1200's and single 255 pump. Edit: updated graph and info per suggestions. Looks like my AFR's need a little work

 

needs more smoothing & update to the latest virtual dyno. http://www.bradbarnhill.com/projects/VirtualDyno/

 

What smoothing level do you recommend? Thanks for the link did not know there was a new version.

 

with the newest one use 2 or 3. whichever one makes it look similar to the ones i posted up recently.

no problem.

also open it, then insert your log set your settings, then close it and reopen it again, then share the result.
sometimes it goes wacko on the first time inserting the log after a fresh install.

 

That's about what I was able to get on the stock IX turbo as well. Well, I could have cranked out more torque, but kept it below 400 ft-lbs for the stock internals.

 

Thanks mrfred, your e85 tuning notes put me on the right track. I was trying to keep it under 400ftlbs. I'm thinking about a BBK or MAP EF series next.

 

Nice numbers. What was your peak boost? Looks about 26 lbs?

 

Thanks man. Peak is 25 psi and 19-20 at red line.
Timing at peak load is 2* and 18* at redline

 

Very good number for a stock Evo 9 Turbo. Damn that E85 is good juice Congrats!!!!

 

Nice, Hoping to try out some e85 next summer.