Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Hallman evo RX MBC install

Thread Tools
 
Search this Thread
 
Old Dec 2, 2004 | 07:56 PM
  #1  
Evoisdream's Avatar
Thread Starter
Evolved Member
iTrader: (27)
 
Joined: Jul 2004
Posts: 1,719
Likes: 1
From: Colorado
Hallman evo RX MBC install

sorry if thier is a thread on this i have searched and cant really find anything other then a install for a turbo xs one dont know if its the same. Dont want to be sorry later on well i just got it today and i would like to install it this weekend if anyone has directions or a link that would b awsome thanks in advance. it also has the incockpit controller

evoisdream
Reply
Old Dec 2, 2004 | 10:37 PM
  #2  
Evoisdream's Avatar
Thread Starter
Evolved Member
iTrader: (27)
 
Joined: Jul 2004
Posts: 1,719
Likes: 1
From: Colorado
NO ONE? how sad where are all teh install masters!
Reply
Old Dec 2, 2004 | 11:18 PM
  #3  
Jakeg97's Avatar
Evolved Member
iTrader: (56)
 
Joined: Sep 2004
Posts: 11,132
Likes: 1
From: Western NY
http://www.hallmanboostcontroller.co...tions%20ld.pdf
Reply
Old Dec 3, 2004 | 01:13 AM
  #4  
Evoisdream's Avatar
Thread Starter
Evolved Member
iTrader: (27)
 
Joined: Jul 2004
Posts: 1,719
Likes: 1
From: Colorado
Nothing comes up when i click that? is that my end or what
Reply
Old Dec 3, 2004 | 02:22 AM
  #5  
EFIxMR's Avatar
Former Sponsor
iTrader: (10)
 
Joined: Oct 2004
Posts: 954
Likes: 3
From: retired
the weak spring is way too soft, don't bother with it. use the stiff spring.
Reply
Old Dec 3, 2004 | 02:47 AM
  #6  
rExTuHfEr's Avatar
Evolved Member
20 Year Member
iTrader: (1)
 
Joined: Mar 2004
Posts: 690
Likes: 0
From: USA
but what if you didnt....
Reply
Old Dec 3, 2004 | 02:54 AM
  #7  
EFIxMR's Avatar
Former Sponsor
iTrader: (10)
 
Joined: Oct 2004
Posts: 954
Likes: 3
From: retired
with the soft spring and the boost control turned all the way down it only boost .7 bar, on the instructions it syas the soft spring will only raise it 5 psi. that is very far from a little under 1.5 bar, which is what you're shooting for. is it possible to use the soft spring?
Reply
Old Dec 3, 2004 | 03:05 AM
  #8  
Deepseadiver's Avatar
Evolved Member
iTrader: (3)
 
Joined: May 2004
Posts: 1,102
Likes: 0
From: GUAM, USA
soft spring works for me at 21 PSI.
Reply
Old Dec 3, 2004 | 10:02 AM
  #9  
Evoisdream's Avatar
Thread Starter
Evolved Member
iTrader: (27)
 
Joined: Jul 2004
Posts: 1,719
Likes: 1
From: Colorado
dif springs eh i guess i should look at the controller a bit more any one have install instructyions where boost lines go etc thanks
Reply
Old Dec 3, 2004 | 10:30 AM
  #10  
EFIxMR's Avatar
Former Sponsor
iTrader: (10)
 
Joined: Oct 2004
Posts: 954
Likes: 3
From: retired
if i remember correctly, the port inline with the controller goes to the boost source on the charge pipe, and the port going to the side goes to the wastegate.
Reply
Old Dec 3, 2004 | 11:15 AM
  #11  
Evoisdream's Avatar
Thread Starter
Evolved Member
iTrader: (27)
 
Joined: Jul 2004
Posts: 1,719
Likes: 1
From: Colorado
ok i got this to open at work thanks for the help i think ill try to set it up this weekend

ill take some pics and let u know how it ends up!
Reply
Old Dec 3, 2004 | 11:29 AM
  #12  
EFIxMR's Avatar
Former Sponsor
iTrader: (10)
 
Joined: Oct 2004
Posts: 954
Likes: 3
From: retired
this might take a little longer, but i found it easier to do once i removed the battery, intake box, and intake tube.
Reply
Old Dec 4, 2004 | 02:15 AM
  #13  
EFIxMR's Avatar
Former Sponsor
iTrader: (10)
 
Joined: Oct 2004
Posts: 954
Likes: 3
From: retired
don't use the soft spring, i tried it today and with it turned all the way it only gave me 1.1 or so bar.
Reply
Old Dec 4, 2004 | 11:22 AM
  #14  
Evoisdream's Avatar
Thread Starter
Evolved Member
iTrader: (27)
 
Joined: Jul 2004
Posts: 1,719
Likes: 1
From: Colorado
ok i need a little help i installed it and everything is working and i put the hard spring in and im still only getting 1 BAR can anyone help?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Evoisdream
Evo Engine / Turbo / Drivetrain
16
Feb 26, 2005 12:43 AM
Evoisdream
Evo Tires / Wheels / Brakes / Suspension
5
Jan 10, 2005 12:25 PM
Evoisdream
Evo Engine / Turbo / Drivetrain
45
Jan 4, 2005 12:22 PM
Evoisdream
Midwest Region
4
Dec 8, 2004 03:39 PM
Evoisdream
Evo Tires / Wheels / Brakes / Suspension
19
Nov 18, 2004 08:57 AM




All times are GMT -7. The time now is 01:12 PM.