Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

how to achieve 400WHP on pump gas...

Thread Tools
 
Search this Thread
 
Old Aug 5, 2005 | 08:35 PM
  #151  
flynz's Avatar
Newbie
 
Joined: Jun 2005
Posts: 6
Likes: 0
From: San Antonio
i would highly recomend the GT35R to you because my friend put that along wiht all of the supporting mods and he is doing 400+++ on 93pump and a conservative tune and well over 500 with C16, of course you will have lag but if this is going to be a 1/4 mile car fix the lag by building boost on the line.... just my $ .02
Reply
Old Aug 6, 2005 | 12:44 AM
  #152  
SachaEvo's Avatar
Newbie
 
Joined: Feb 2005
Posts: 11
Likes: 0
with out my stand-alone when it was just fuel management and boost controller with the all bolt ons and stock internals and stock head i put down with 91 octane in kali on 21 psi with a gt 3037s atp turbo 373hp on mustang dyno which is about 450 on a dinojet. So its very possible!
Reply
Old Aug 6, 2005 | 12:48 AM
  #153  
SachaEvo's Avatar
Newbie
 
Joined: Feb 2005
Posts: 11
Likes: 0
Sorry I ment stock block. haha. atp turbo is great for the money . retains stock intake manifold and stock intercooler. I only spent 2200 on the kit. With my stand-alone on c16 octane I'm probably looking at 550 on dinojet at 26 psi. or boost low,its a good turbo is what i'm saying.
Reply
Old Aug 9, 2005 | 06:55 PM
  #154  
htsai14752's Avatar
Evolving Member
iTrader: (19)
 
Joined: Oct 2003
Posts: 248
Likes: 0
From: san gabriel valley
"Sorry I ment stock block. haha. atp turbo is great for the money . retains stock intake manifold and stock intercooler. I only spent 2200 on the kit. With my stand-alone on c16 octane I'm probably looking at 550 on dinojet at 26 psi. or boost low,its a good turbo is what i'm saying."

u like the 3037 over the 3071? what trim size is this turbine? better than RNR 50 trim
Reply
Old Aug 9, 2005 | 07:02 PM
  #155  
Erik@MIL.SPEC's Avatar
Former Sponsor
iTrader: (94)
 
Joined: Dec 2001
Posts: 5,695
Likes: 24
From: Los Angeles
Henry, slow spool on that 3037. Unless you're going to be running race gas a lot, think smaller. That's my .02.

Do you have cams yet? Get those and pick your EM solution. Then think about a turbo.
Reply
Old Aug 9, 2005 | 07:06 PM
  #156  
Erik@MIL.SPEC's Avatar
Former Sponsor
iTrader: (94)
 
Joined: Dec 2001
Posts: 5,695
Likes: 24
From: Los Angeles
Originally Posted by Z1 Performance
on 91 octane, I don't see the white rabbit being able to to touch 400 whp either....again, unless alcohol is involved
I say the upper limits of the WR on 91 are in the 340 to 350whp range on a dynojet with much cooler temps. Not the 100s that everyone is dynoing with right now. That's with cams and a test pipe, BTW.

THis is only my uneducated opinion, I could be wrong.

I made 306, 306 on a dynojet with no cams and a HFC, 95+ temp, and not a ***** out, overly aggressive tune.

Last edited by Erik@MIL.SPEC; Aug 9, 2005 at 07:11 PM.
Reply
Old Aug 9, 2005 | 07:56 PM
  #157  
RnR Racing's Avatar
Evolved Member
iTrader: (23)
 
Joined: Jul 2003
Posts: 1,836
Likes: 0
From: San Diego
Here is some of the numbers we have seen on 91 pump gas NO ALKY


1)2.0, GT35R, EMS, tons of supporting mods, 460whp on 91, 24psi

2)2.0, GT35R, EMS, even more supporting mods, 470whp on 91, 24psi

3)2.4, GT40, EMS, lots of mods, 520whp on 91, 22psi
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GST Motorsports
Evo Dyno Tuning / Results
29
Mar 14, 2009 09:58 AM
L80Killa87
Evo Engine / Turbo / Drivetrain
44
Aug 5, 2007 01:35 AM
Dem_z
Lancer Aftermarket Forced Induction Tech
26
Jan 17, 2007 02:01 PM
Gruppe-S
Evo Engine / Turbo / Drivetrain
70
Feb 24, 2006 08:00 AM
Vivid Racing
Evo 'For Sale' External Engine / Power
1
Dec 21, 2005 11:51 AM




All times are GMT -7. The time now is 11:54 AM.