Guys can ı use my 30r without standalone because ı m using ecutec reflash.Have you got any bad experience between maf and gt30 series turbos?Is that maf enough to use?

 

My buddy runs a GT30r on a UTEC which is very similar in the way a reflash works. He is still running stock MAF with no problem as well.

 

dont quote me on this but I have heard that the stock maf is good to about 430 hp

 

It is definitely benefitial to go with speed density especially with a larger turbo I was just saying that my friend runs MAF still with no problem.

 

I ran my 30r with a utec and alky. I put down 456awhp with my stock maf.

--Josh

 

 

I was running a solid mid 11's @ 122mph on a Dynoflash and the GT30r. The car drove great and made some nice power.

 

There's definitely no problem in using flash-based tuning on the stock ECU with a GT30R or even GT35R. Sure, you'll get significantly more power with a stand-alone... especially when using speed density, however, EcuTek will do the job fine. Just make sure your tuner knows what he is doing and scales the injectors correctly.

 

Ok well, ı'am really glad to that

 

But ı have a another question!!! What about the idle? Is ıt stalled after the 30r , because of not enough maf?

 

I would only recommend a standalone if you were planning to run different race gas map but ECUtek would be a better choice if your car is daily driven.

Thanks,
Tom

 

Works is doing similar with there time attack car and so does Garage HRS so it seems like a great option, I am going to be doing both.