EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Best downpipe on a IX??? Fitment/quality/craftsmanship/performance

Thread Tools
 
Search this Thread
 
Old Apr 14, 2008 | 04:04 PM
Share
  #271  
injentech42's Avatar
injentech42
Account Disabled
iTrader: (19)
 
Joined: Feb 2007
Posts: 590
Likes: 1
From: New York
rsr
Reply
0
Old Apr 14, 2008 | 04:59 PM
Share
  #272  
Burklow's Avatar
Burklow
Evolved Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 951
Likes: 0
From: Nashville, TN
Megan ACD model downpipe. Fit great. Everything lined up. Didn't have to space out any crossbars.
Reply
0
Old Apr 14, 2008 | 05:58 PM
Share
  #273  
SunKren's Avatar
SunKren
Evolved Member
iTrader: (4)
 
Joined: Jul 2007
Posts: 749
Likes: 0
From: Seattle
Originally Posted by Burklow
Megan ACD model downpipe. Fit great. Everything lined up. Didn't have to space out any crossbars.
I have Megan DP + Test Pipe.

Do you hear any rattle when you driving from 2k to 3k rmps? I do. It is irritating.

Any suggestion?
Reply
0
Old Apr 14, 2008 | 09:33 PM
Share
  #274  
JDMCT9MR's Avatar
JDMCT9MR
Evolved Member
iTrader: (56)
 
Joined: Apr 2007
Posts: 3,062
Likes: 2
From: Los Angeles
I have the HKS GT Extension Kit.It was a bit on the expensive side but it was well worth it.Nice power and excellent craftsmanship.Plus it is kind of a rare piece.
Reply
0
Old Apr 14, 2008 | 10:34 PM
Share
  #275  
EVO_SE's Avatar
EVO_SE
Newbie
iTrader: (5)
 
Joined: Apr 2007
Posts: 72
Likes: 0
From: Ca
will ets 3.5 fit the evo 9?
Reply
0
Old Apr 14, 2008 | 10:41 PM
Share
  #276  
benniboi08's Avatar
benniboi08
Evolving Member
iTrader: (35)
 
Joined: Jun 2007
Posts: 235
Likes: 0
From: Central Jersey
+1 Megan Racing Evo IX downpipe. clears everything like said before.
Reply
0
Old Apr 21, 2008 | 09:11 PM
Share
  #277  
hytek369's Avatar
hytek369
Evolved Member
iTrader: (81)
 
Joined: Jul 2007
Posts: 952
Likes: 0
From: Boston, MA
which 3 inch DP requires spacers?
Reply
0
Old Apr 22, 2008 | 11:26 AM
Share
  #278  
hytek369's Avatar
hytek369
Evolved Member
iTrader: (81)
 
Joined: Jul 2007
Posts: 952
Likes: 0
From: Boston, MA
anyone?
Reply
0
Old Apr 22, 2008 | 11:28 AM
Share
  #279  
mrfred's Avatar
mrfred
EvoM Guru
iTrader: (50)
 
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
With Helix v2, spacers only needed for Cusco LAB v2 but not stock tie bars.
Reply
0
Old Apr 22, 2008 | 04:28 PM
Share
  #280  
hytek369's Avatar
hytek369
Evolved Member
iTrader: (81)
 
Joined: Jul 2007
Posts: 952
Likes: 0
From: Boston, MA
i hear the cobb DP can clear the lower tie bars without spacers
Reply
0
Old Apr 22, 2008 | 06:12 PM
Share
  #281  
Mr. Furley's Avatar
Mr. Furley
Account Disabled
iTrader: (1)
 
Joined: Mar 2007
Posts: 448
Likes: 0
From: DTA wa
How is the Perrin DP? I'm shopping for a 3"
Reply
0
Old Apr 22, 2008 | 07:16 PM
Share
  #282  
hytek369's Avatar
hytek369
Evolved Member
iTrader: (81)
 
Joined: Jul 2007
Posts: 952
Likes: 0
From: Boston, MA
just contacted a vendor about perrin. looks like it will fit without any spacers. its about $50 cheaper than cobb, so i think i am getting it.
Reply
0
Old Apr 22, 2008 | 07:19 PM
Share
  #283  
Import Junky's Avatar
Import Junky
Account Disabled
iTrader: (7)
 
Joined: Dec 2005
Posts: 2,673
Likes: 0
From: Lansdale
ams
Reply
0
Old Apr 22, 2008 | 07:39 PM
Share
  #284  
hytek369's Avatar
hytek369
Evolved Member
iTrader: (81)
 
Joined: Jul 2007
Posts: 952
Likes: 0
From: Boston, MA
Originally Posted by Import Junky
ams
ams only works with ams products. plus, they are overpriced. i rather stick with buschur.
Reply
0
Old Apr 22, 2008 | 07:41 PM
Share
  #285  
injentech42's Avatar
injentech42
Account Disabled
iTrader: (19)
 
Joined: Feb 2007
Posts: 590
Likes: 1
From: New York
rsr
Reply
0



Advanced Search

All times are GMT -7. The time now is 03:32 AM.