ok i keep getting

PO335B which is crankshaft position sensor A A circuit malfuntion
PO340 which is crankshaft position sensor A circuit BL

car runs fine. as soon as i clear the code BAM the lite is back on. these to codes keep poping up. any idea's????

 

Do u have any mods?

 

https://www.evolutionm.net/forums/sh...ighlight=PO340

https://www.evolutionm.net/forums/sh...ighlight=PO340

https://www.evolutionm.net/forums/sh...ighlight=PO340

https://www.evolutionm.net/forums/sh...ighlight=PO340


https://www.evolutionm.net/forums/sh...ighlight=PO340


did you just have cams installed?

 

yea. all bolt on's and cams. just got done doing a timing belt.

 

yes 4tun8 i did.

 

I have a feeling your timing is off. Or you messed something up during the install....did you do it all yourself? Or did you have a shop do it?

edit: btw next time post this type of thing in Engine Turbo Drivetrain section, it will make it easier to search for, and will be in the correct section.

 

ok sorry for the wrong post spot.

i had a shop look at the car. i brought it there not running and they got it running. they fixed my timing and a few other things. then the code just keep poping. right after i clear it and the light go's off not even a second later the lite come's back on. car run's fine. but when im driving coming to a stop is where it wants to stall out. if i tap the gas and try to help keep it around 1k rpm it will level its self out and not stall. the shop said they check'd everything and it was all conected. now im wondering whats going on here. lol

 

how hard is it to check the timing myself?

would someone mind guiding me thru it?

 

anyone?

 

search for it bro, I was hinting, I don't feel like digging for you again =) Maybe I'll get bored and search for it for you later.

 

I moved over to Engine/Turbo/Drivetrain.

 

ok well im not getting any help or any luck anywhere. i did search. i found nothing that helpd. my sensors are not wet. there on right. nothing makes sence. i dont know what else to do.