I have completed the cleaning of this. Before I looked for this I spoke to my mechanic who told me to check the MAS and check for a vaccume line that might be off to fix my inability to idle.
So I cleaned the entire inside of the MAS with a soft tissue. And fired the car up, worked like a charm.
So Later I decided to do as you all had written about and use the cleaner. It worked like a charm, for the first 15 min. Now I am right back to where I started with this stalling crap.
Anyone have anything else I can try?

 

I think the stalling could be related to a failing o2 sensor.

 

i agree... about both, the cat IS badass

 

I can't find any MAF cleaner in that damn island. Is there an alternative product to clean my MAF.

Thank you

 

Do NOT use carb cleaner it will damage electronics.

essentially MAF cleaner is just circuit board cleaner. If it doesnt say its safe for electronics on the can of bottle I wouldnt trust it as MAFs are salty to replace.

 

I only found these 2:

http://www.crcindustries.com/ei/cont...x?PN=03200&S=Y

http://www.crcindustries.com/ei/cont...x?PN=02200&S=Y

Will they be ok for the maf?

Thank You,

 

yes they are both fine
i have used the blue labelled can
i always clean maf when cleaning filter
always do this when the maf is stone cold

 

did the same thing to mine and took the screen out. it deff seems a lot smoother

 

how do you remove the honeycomb?

 

Very carefully.

 

Good info, coming from map cars, I would of never thought to clean that.

 

Did you permanantly remove your honeycomb? I didnt know this was removable

 

I cleaned mine earlier today. I didn't think it was going to make that much of a difference, but i I was very wrong!
before and after shots.

 

I just bought some of this from Murrys auto parts store. I will use it this weekend to see how it works.

 

i have the bottle in the garage, gotta clean it soon