The Best Stock Turbo Manifold?
I did! But its just sitting here at the moment.. Been doing alot of racing and time attack events so I didnt want to touch the setup as it is going well.
Going to pull the car apart again in late september to do a few things that need addressing...
-Full-Race manifold install
-Remove backing plates from brakes
-Brake cooling ducts
-Custom plates for suspension (allow me to get an additional 2* of castor and 0.5* of camber at the front)
-New wheel alighnment (raise hight of car)
-18*9.5" CE28N with 265/35 bridgestone RE55S
-15mm front spacers
-Voltex type 5 rear wing
-Retune
Going to pull the car apart again in late september to do a few things that need addressing...
-Full-Race manifold install
-Remove backing plates from brakes
-Brake cooling ducts
-Custom plates for suspension (allow me to get an additional 2* of castor and 0.5* of camber at the front)
-New wheel alighnment (raise hight of car)
-18*9.5" CE28N with 265/35 bridgestone RE55S
-15mm front spacers
-Voltex type 5 rear wing
-Retune
Thread Starter
Evolved Member
iTrader: (90)
Joined: Nov 2005
Posts: 4,800
Likes: 6
From: Raleigh, NC
Thanks for the mention.
If anyone is in the market for a stock replacement manifold. Please check out this thread on our FiD stock turbo manifold vs ported stock manifold comparison.
https://www.evolutionm.net/forums/ev...-manifold.html
MrC
If anyone is in the market for a stock replacement manifold. Please check out this thread on our FiD stock turbo manifold vs ported stock manifold comparison.
https://www.evolutionm.net/forums/ev...-manifold.html
MrC
Introductory pricing and warranty info posted here:
https://www.evolutionm.net/forums/ve...-manifold.html
MrC
https://www.evolutionm.net/forums/ve...-manifold.html
MrC
http://www.ptuning.com/html/Item-Des...c=Lancer%20Evo
MrC



