MarioTME

Just ordered my Synapse Synchronic BOV
looking forward to install it as soon as it arrives.
I Just hope it wont let me down.
hope some of you guys have the propper EVO installation regarding the Vaccum hoses (Ports, A, B, C)

cheers

jxs1984

iTrader: (17)

be sure to post a review after you install it

Evo8Emperor

iTrader: (12)

Port C is a boost only source and should always be hooked up so its shut under boost. While port A and B are your choice and which works better.

I myself have just port A to a vacuum source and b open to the atmosphere.

black E

iTrader: (77)

same here!
i think it this DV works better than the stock EVO 9 DV...

MarioTME

WOW thanks guys for the responses!!
by the way any of you have it dumping to atmosphere with a MAF sensor?

Sin13

i have both A and B contacted to the vacuum,

You could if you have the anti stall kit, but it would really shine in the stock location boost is there all the time between shifts.

Evolessfornow

iTrader: (28)

My A and B ports tee into the stock bov vac line. C is teed to my compressor outlet pipe line.

mrdecrypter

iTrader: (6)

without drilling, how can one tap a "Boost only" source?

Evolessfornow

iTrader: (28)

Compressor pipe vac line.

mrdecrypter

iTrader: (6)

compressor pipe? where exactly?

denver

iTrader: (9)

Subscribed..... I have been looking at this DV for a while.... it all sounds pretty good.... curious about what everyone thinks, very interested in hearing from people who regularly track their cars regarding part throttle flutter....

Evolessfornow

iTrader: (28)

Cold side of turbo before the licp.

mrdecrypter

iTrader: (6)

ohh k. thanks

oneonlywgs

iTrader: (2)

I've had this bov for about 4 months. Love it.

tatsuIX

iTrader: (4)

I'm lucky enough to work down the street where they make them valves (you know what I mean), everyone there is cool. They actually hooked me up!!! they did a special install & customization of the actual Valve, where I don't have port C connected!!! sweet, very responsive!!! IMO out performs the Forge RS I had. Best valve by far that I have tried. They also found that the stock vac line coming from the manifold was... well... not very responsive (in my car) so they relocated the A and B port to another location that was very responsive (odd, I wonder how many of us have this issue and we don't even know about it). Anyway take alook at their web site and check out the EVO install, you may want to try this setup.

oh yea, I had them install it coming off the UICP instead off the intake, works just as good and looks ten times cleaner!!!

Synapse... Outstanding products... Outstanding Support!!!