Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Getting ready to install evo 9 turbo into evo 8.

Thread Tools
 
Search this Thread
 
Old Mar 30, 2009 | 09:52 PM
  #1  
Inflation's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2008
Posts: 137
Likes: 0
From: home
Getting ready to install evo 9 turbo into evo 8.

I've been searching for the thread that shows the part numbers for everything I would need to put in an evo 9 turbo, manifold, hotside etc.

Can anyone link it for me please?


Don't flame.
Reply
Old Mar 30, 2009 | 09:56 PM
  #2  
justa4banger's Avatar
Evolved Member
iTrader: (14)
 
Joined: Mar 2008
Posts: 1,340
Likes: 0
From: underground
all you need is the 9 turbo j-pipe and a 10.5 hotside....you can use the 8 turbo manifold and 8 turbo oil and coolant lines....
Reply
Old Mar 31, 2009 | 01:18 AM
  #3  
Inflation's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2008
Posts: 137
Likes: 0
From: home
Okay well I have the Evo 9 Turbo and the 10.5 hotside so I should be good to go? I got new gaskets also.
Reply
Old Mar 31, 2009 | 01:28 AM
  #4  
whoang40's Avatar
Evolved Member
iTrader: (26)
 
Joined: Jun 2005
Posts: 717
Likes: 0
From: St. Paul, MN
I'd recommend getting new copper gaskets for the oil feed line.
Reply
Old Mar 31, 2009 | 02:08 AM
  #5  
Inflation's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2008
Posts: 137
Likes: 0
From: home
So which one of these should I pick up?


http://store.forcedperformance.net/m...Lancer-TurboHW



http://store.forcedperformance.net/m...Lancer-TurboHW
Reply
Old Mar 31, 2009 | 03:12 AM
  #6  
ch53avitech's Avatar
Evolved Member
iTrader: (37)
 
Joined: Feb 2008
Posts: 957
Likes: 0
From: San Diego, CA
I'd get the install kit (the $135 one). I don't believe in taking shortcuts by not replacing the lines. And while your at it get the turbo ported if you want to go all out.

Last edited by ch53avitech; Mar 31, 2009 at 03:15 AM.
Reply
Old Mar 31, 2009 | 04:19 AM
  #7  
Gary@MellonRacing's Avatar
Former Sponsor
iTrader: (74)
 
Joined: Mar 2008
Posts: 1,640
Likes: 0
From: miami florida
u need evo 9 turbo
evo 9 actuator , should buy 18psi if u will b running 18+ boost
the install kit to use the 9 turbo on an 8
when buying the install kit u need to specify if u want stock oem pipe or j race pipe for turbo
Reply
Old Mar 31, 2009 | 08:39 AM
  #8  
justa4banger's Avatar
Evolved Member
iTrader: (14)
 
Joined: Mar 2008
Posts: 1,340
Likes: 0
From: underground
all i did was use the lines from the 8 turbo, and i just bought the j-pipe and i used the stock copper washers because they looked good...but hey if you have the money to spend go ahead and do it...but i would get a 02 housing instead of that install kit if you do have the money....
Reply
Old Mar 31, 2009 | 08:46 AM
  #9  
Boltz.'s Avatar
Evolved Member
FCOTM Winner
iTrader: (42)
 
Joined: Aug 2005
Posts: 2,502
Likes: 0
From: St. Charles, IL
Just need the turbo and the compressor outlet pipe.
Reply
Old Mar 31, 2009 | 09:39 AM
  #10  
Fast_Freddie's Avatar
Evolved Member
Veteran: Navy
iTrader: (50)
 
Joined: Jun 2007
Posts: 2,706
Likes: 15
From: Lexington Park, MD
The oil feed line and the coolant lines are a little different but can be bent (carefully) to fit. I would go ahead and invest in all new crush washers for everything, and new gaskets for the oil return line (turbo side and oil pan side), then a new IX J-pipe. I just did this swap about 2 weeks ago, and I bought everything from Russell at mitsubishiparts.net. he has the IX install kit listed on the site also if you want new everything, but his kit doesn't include all of the crush washers or the manifold to turbo gasket. I would also suggest spending a few extra dollars and picking up an ebay O2 housing while you have everything off cause that will definitely help you in the long run...

http://www.mitsubishiparts.net/catalog/?section=652 scroll all the way to the bottom of the page...
Reply
Old Mar 31, 2009 | 11:54 AM
  #11  
Inflation's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2008
Posts: 137
Likes: 0
From: home
Thanks for the help all!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
evo9ben
For Sale - Engine / Drivetrain / Power
0
Apr 22, 2017 12:29 PM
eisnikesb
For Sale/WTB - Engine / Drivetrain / Power
3
Dec 7, 2016 08:46 AM
terfer
For Sale/WTB - Engine / Drivetrain / Power
3
Jul 7, 2009 04:29 AM
bank277
For Sale/WTB - Engine / Drivetrain / Power
5
Jul 24, 2008 04:02 PM
The442GTO
Evo Engine / Turbo / Drivetrain
3
May 8, 2006 09:06 PM




All times are GMT -7. The time now is 01:01 AM.